Camus Hydronics

Listing Results Camus Hydronics

Frequently Asked Questions

• What are the installation instructions for Camus Hydronics?

  Follow the gas supplier’s instructions, o If you cannot reach your gas supplier, call the fire department. Qualified installer, service agency or the gas supplier must perform installation and service. To the Installer:After installation, these instructions must be given to the end user or left on or near the appliance.

• Do you need a draft gauge for a Camus Hydronics boiler?

  The serviceman must utilize a combustion analyzer with CO2, CO, and draft gauge to set the appliance according to Camus Hydronics Limited窶冱 recommendations, prior to commissioning. NOTE RETAIN THIS MANUAL FOR FUTURE REFERENCE

• Why is Camus Hydronics important to the environment?

  Camus Hydronics is taking a leading role in the development of environment-friendly products through innovative engineering as we incorporate the very latest technologies designed to create higher efficiency levels while lowering emissions.

• Which is the most efficient Camus condensing system?

  As non- condensing 85% efficient, available in models 4504, 5004, 6004. As near condensing (DFX) 88% efficient DFX, available in models 4514, 5014, 6014. As full condensing 95% efficient, available in models 4524, 5024, 6024

• Who is required to install a Camus hydronic?

  Installing, servicing or adjusting this appliance should be performed only by a qualified installer/technician that is trained by Camus Hydronics. The serviceman must utilize a combustion analyzer with CO2, CO, and draft gauge, to set the appliance according to Camus Hydronics’ recommendation s, prior to commission ing.

• What does the installation and Service Manual do?

  This manual supplies information for the installation, operation and servicing of the appliance. It is strongly recommended that this manual be reviewed completely before proceeding with an installation CAUTION It is important that all gas appliances are installed by a competent person.

• What kind of pressure does a Camus boiler use?

  The boiler/water heater will automatically modulate to provide heat outputs between 100% and down to 10% for models AV500 & AV600 and down to 4.5% for models AV800 to AV1800 and 4.0% for models AV2000 to AV4000. The Advantus models 500 & 600 use a single automatic gas valve and operate on the principle of negative pressure.

• How does a Camus dynaflame water heater work?

  It is designed for use with a fully pumped and pressurized system. The boiler/water heater will automatically modulate to provide heat outputs between 100% to approximately 35% of rated input on non-condensing models and down to 20% on near condensing (DFX) and condensing models. The DynaFlame works on the principle of differential pressure.