E Flite Timber Manual

Listing Results E Flite Timber Manual

Frequently Asked Questions

• Is the E-flite timber x 1.2m BNF basic?

  The E-flite® Timber X 1.2m combines the STOL capabilities of the original model with a new wing design featuring oversized ailerons and flaps, plus an enlarged rudder and elevator and a more powerful 3S and 4S compatible power system, to also deliver 3D performance you'd expect from an all-out aerobat!

• What are the features of an E-flite timber?

  The Timber wing is designed with STOL features like wing-tip droops, optional leading edge slats and functional flaps. These, along with the model's powerful brushless motor and lightweight, Z-Foam™ construction, allow it to spring into the air or float down and land in as little as two feet or less.

• What is the instruction manual for EFL timber?

  Instruction Manual Bedienungsanleitung Manuel d’utilisation Manuale di Istruzioni SAFE®Select Technology, Optional Flight Envelope Protection EN Timber™ As the user of this product, you are solely responsible for operating in a man- ner that does not endanger yourself and others or result in damage to the product or the property of others.

• How to program the Horizon Hobby E-flite timber?

  Here is a short Horizon video on programming the Timber receiver. The video shows programming AS3X only and then programming SAFE Select enabled. The final segment shows how to program a switch to engage SAFE Select. However, even this Horizon video did not mention the 100% travel secret requirement.

• What is the instruction manual for EFL timber bnfbasic?

  49134.2 EFL Timber BNFBasic PNP Manual Instruction Manual Bedienungsanleitung Manuel d’utilisation Manuale di Istruzioni SAFE®Select Technology, Optional Flight Envelope Protection EN

• Is the E-flite UMX Turbo timber BNF basic?

  This plane is a BNF Basic version and does NOT include a transmitter, flight battery, and charger. Scaled down from the legendary Timber® 1.5m, the E-flite® UMX™ Timber was the iconic ultra micro model best-equipped for exciting STOL (Short Take Off and Landing) adventures and beyond…until now.

• How to set dual rates on a bnfbasic PNP?

  Start all transmitter programming with a blank ACRO model (do a model reset), then name the model. Set Dual Rates to: HIGH 100% LOW 70% Set Servo Travel to: 100% DX6i 1. Go to the SETUP LIST MENU 2. Set MODEL TYPE: ACRO 3. Go to ADJUST LIST MENU 4. Set FLAPS: Norm 100 Flap LAND 60 Flap DX7S DX8 1. Go to the SYSTEM SETUP 2.

• When to set stopwatch on EFL timber PNP?

  For your fi rst fl ights with the recommended battery pack (EFLB22003S30), set your transmitter timer or a stopwatch to 7 minutes. After fi ve minutes, land the aircraft. Adjust your timer for longer or shorter fl ights once you have fl own the model.