HANTEL

Listing Results HANTEL

Frequently Asked Questions

• What to do when you get a hantle error code?

  In the case of a dispute from the error, use CDU data in the journal to verify how many notes were actually dispensed. Similar to the COO11 error, this would indicate a bill jam close to the exit of the CDU or near the reject bin. Check for jammed notes or blocked sensors.

• What is the country code on the hantle dispenser?

  The dispenser and mainboard are programmed with a country code (USA or Canada). The two codes must match. If they do not the 20005 error will occur in which case the CDU will need to be reprogrammed to match the AP on the mainboard.

• What are the error codes for the hantle ATM?

  Tranax (Hantle) ATM Error Codes Code Description Resolution 00000 Normal Status Normal Status 20001 Unable to detect a cassette Remove and replace cassette – Check the ... 20002 Low Cash Low cash warning sensor on dispenser is ... 20003 Reject Bin is Full Empty reject bin – if bin is empty, do a ... 20 more rows ...

• How does the Hanel lift controller start up?

  Anytime the Hanel lift is powered on using the main power switch on the front of the lift, the lift controller will go through a start up sequence. During the power on initialisation, the operator will be prompted several times to press the green Enter key on the controller keyboard.

• What are the features of the hantle 1700?

  1.1 Features 1.1.1 About the Hantle 1700™ 1.2 Specifications Hantle 1700™ Specifications 1.2.1 Dimensions and Component Locations 1.2.2 LCD & Customer Keypad 1.2.3 Cash Dispensing Unit 1.2.4 Receipt Printer 1.2.5 Main Control Board 1.2.6 Operating Environment 1.3 Warranty/Service 2. INSTALLATION

• What kind of warranty does hantle ATM have?

  MANUFACTURERS WARRANTY Hantle USA, Inc. provides a limited one-year parts warranty and a limited 30 day labor warranty for the 1700™ series ATM. Hantle guarantees your 1700™ model ATM to be free from defects in materials and workmanship.

• What kind of phone line does hantle 1700 need?

  The Hantle 1700™ series ATM should be connected to a dedicated phone line. This line must be a direct dial “tone” or “pulse” line that is equipped with a standard telephone wall jack (RJ-11). This line cannot be shared with any other equipment at the location.

• What kind of circuit does hantle ATM need?

  For warranty purposes, the Hantle 1700™ series ATM must be connected to a dedicated power circuit. This circuit must consist of line, neutral, and ground leads connected directly to the power circuit breaker panel. This circuit should not be shared with any other equipment.