J3c User Guide

Listing Results J3c User Guide

Frequently Asked Questions

• How do you use the J-3 indicator?

  This device sits right in front of your face (if you don't have a passenger in the front seat, that is) out there on the upper cowling, and is about as intuitive and primitive an indicator of how much go-juice you have left as could be imagined. As you can see, everything about the J-3 is simple and, accordingly, elegant. 2

• Do gyroscopically driven instruments work in a J-3 Cub?

  Gyroscopically driven instruments require an electrical system and other complicated interfaces which were never installed in any J-3 Cub at the factory. Certainly, some owners have retro-fitted gyros and such, but the stock, unmodified and un-modernized Piper J-3 Cub that A2A has supplied has none of these amenities.

• What is a J-3 Cub?

  A Short History of a Small Airplane The progenitor of the J-3 Cub was the Taylor E-2. This airplane, which had many of the familiar lines of what would become the J-3, appeared in 1930 in the beginning of the Great Depression.

• How many models of Piper J-3 Cub are there?

  Variants You have four primary models included with your A2A Piper J-3 Cub, each with at least two different paint schemes: • Stock • Tundra Tires • Floats • Skis 37 POH Flying the Cub I was going to call this part “The Quick Guide to Flying the Piper Cub”.

• What is a J3C electric actuator?

  J+J's J3C electric actuator range was split between the 24-240V J3CS in Models 20 through to 85, and the J3C series for models J3CH140 and J3CL140 for 140Nm torque output and the J3CH300 and J3CL300 for 300Nm torque output, with the 'H' for high voltage (typically 110-240V) and 'L' for 24V AC/DC.

• What's new in the J+J j3cs series?

  The J+J J3CS series unveilled a universal multi voltage allowing any signal of 24V through to 240V. The actuator has an upgraded multi-colour LED status light compared to its predecessor, the J3C series and introduced a green light for open and red light for closed giving clearer indication of the actuator's position and status.

• What are the features of the J+J electric actuator series?

  The J+J electric actuator series J3CS had a IP67 housing, manual override hand wheel, limit switches, LED status light and electronic torque limiter, among many other features. Note below you can see J3C140 and J3C300 actuator models, these will soon be the new S type.

• Where can I find information about programming in the logix5000 controller languages?

  For information about programming in these languages, see the Logix5000 Controllers Common Procedures Programming Manual, publication 1756-PM001. Table 45 - ControlLogix Controller Programming Languages Language Is best used in programs with