Page 7: Setting Up A Sensor. SP8 Manual 1) Select firmware upgrade 2) Type in the IP address of the unit 3) Type in the administrator password 4) Click browse, a new window will pop up 5) Select the zipped firmware file, click open. 6) When complete the message “upgrade complete” will be displayed...
Show more
See More
View and Download Jacarta InterSeptor Pro user manual online. Environmental Monitoring System for Data Centers, Server Rooms, Racks. 8-Port, 16-Port, 24-Port Versions. interSeptor Pro measuring instruments pdf manual download.
Show more
See More
chevron_right; chevron_left Americas; Canada English chevron_right Canada Français chevron_right Latinoamérica Español chevron_right Brasil
Show more
See More
User's Manual¶. Click on the section name to go straight to the section. Click on the "+" to go to the relevant section of the detailed section list, where you can select individual subsections.
Show more
See More
USER MANUAL – Plotterku – Jual Rental Plotter HP No 1 di Jakarta. USER MANUAL rplot 2020-02-21T15:31:17+07:00.
Show more
See More
If you require any further assistance at all please don't hesitate to contact us at support@Jacarta.com and we will come back to you as soon as possible. Full product literature, including product specifications, can be downloaded here.
SP2/SP8/SP8-X20 Manual Updated until firmware 413 - 15 - e) This window is used for configuring the sensors parameters. These parameters are explained below :- Description :-The name of the sensor. Use a meaningful name such as “humidity sensor office1” Go Online/Offline :-This takes the sensor on or offline without unplugging it from the unit
The SP2 is a small unit with facility for 2 RJ45 sensor inputs. The SP8 is a larger unit with the facility for up to 8 RJ45 inputs. 3. What’s the difference between the SP8 and the SP8-X20?
SP2/SP8/SP8-X20 Manual Updated until firmware 413 - 22 - a) After clicking the “Network” tab you will be taken to this page :- b) Once on this page you can setup the network settings as indicated below :- IP Address :- Use this to change the IP address of your unit Subnet Mask :- Use this to assign the subnet mask of your unit