What are the pros and cons of superyacht hull design?

In this guide to superyacht hull design, we break down the specs, must-know information and outline all of the pros and cons of the typical superyacht hull shapes. Increase stability by reducing weight (if the centre of gravity remains the same) a heavy boat is not necessarily more stable

How do we design the underwater volume of a hull?

We design the underwater volume of a hull to be distributed in a way that matches the optimal fore and aft center of gravity of the assembled boat plus her occupants and gear. This “center of buoyancy” is the volumetric center of the shape of the underwater part of the hull.

Why do we need to quantify hull shapes?

As in nature, beauty is a by-product of function, so naval architects need ways to quantify hull shapes in order to optimize them for performance, seaworthiness and fairness for buildability. How do we develop and quantify these compound curves?

What makes a well-designed hull form?

The beauty of a well-designed hull form is one result of the constantly evolving surface curvature from bow to stern. As in nature, beauty is a by-product of function, so naval architects need ways to quantify hull shapes in order to optimize them for performance, seaworthiness and fairness for buildability.

Jaht Design Guide - Finder Manual

Listing Results Jaht Design Guide

About 19 results and 4 answers.

Yacht Design Explained: A Boat Owner's Guide to the

The first guide to design aimed at every sailor, Yacht Design Explained uses state-of-the-art graphics, dynamic charts and photographs, and clear explanations to show what makes hulls, keels, ballast, rudders, foils, masts, and sails work. It …
Format: Hardcover
Author: Doug Hunter, Steve Killing

A guide to superyacht hull design - BOAT International

Jan 21, 2015 . A guide to superyacht hull design A guide to superyacht hull design In this guide to superyacht hull design, we break down the specs, must-know information and outline all of the pros and cons of the typical superyacht hull shapes. Displacement, semi-displacement and planing hull types Displacement yacht hull design Fn: up to about 0.42

The Basics of Hull Design Explained - Power & Motoryacht

May 21, 2019 . By creating a 3D hull shape from four sets of two-dimensional curves: stations, waterlines, buttocks and diagonals. Waterlines Think of a loaf of bread from which you might make toast. One end is the bow, the other end the stern of your “boat.” Better yet, imagine four loaves of bread on your kitchen counter.

Yacht Design Explained: A Sailor's Guide to the Principles

Site Guide - Kasten Marine Design

A complete site guide and index of all Yacht Designs and Articles at Kasten Marine Design. Messing about in boats since 1975. ... On Boat DESIGN . The Custom Yacht Design Process Our CAD Design Stream Our Stock Boat Designs

BDO Epheria Sailboat: Design, Materials, Quest GrumpyG

BDO Epheria Sailboat: Design, Materials, Quest. BDO Epheria Sailboat is known as the best T2 Barter and Trade ship. It isn’t top tier anymore, since the Great Expedition update, but it still beats many beginner tier ships. It is the easiest T2 ship to obtain, but still takes plenty of planning and work/cost to obtain one!

15 Cardboard Boat Designs Guide Patterns

Instructions for a Cardboard Boat That Floats. This cardboard boat regatta design really works. You can use a template for your DIY boat. There are written instructions as well as a video tutorial to guide you with the construction. It is a good boat design for two people.

Catamaran Design Guide - Catamarans Guide - SchoonerMan

Feb 18, 2022 . Sail Area to Wetted Surface (SAWS) SA/WS = Sail Area Wetted Surface Coefficient SA = upwind sail area WS = total underwater surface area (hull and appendages) This formula simply divides the upwind sail area of the boat (mainsail and 100% jib) …

Boat Interiors: A Guide To Design And Decor - YachtWorld

YachtWorld provides an overview on the evolution of yacht design. We asked Tim Goslin g, a London-based interior designer at the forefront of superyacht design for his expert comments on the different segments of yacht design. Space and Sound Minimalism is key and the latest cutting-edge technology supports a clean, simple look.

A guide to the best European shipyards - e-architect

Mar 29, 2022 . Building a yacht is a complex process. An experienced yacht brokerage will expertly guide you through every stage of the build process, from sketch board to on the water. Comments on a guide to the best European shipyards are welcome Boats Boat Design Articles Building a yacht New Yachts 2018 Dutch Yacht Builders image courtesy of article provider

Foiling and Foil Shapes, a Beginner’s Guide >> Scuttlebutt

Jun 02, 2017 . Foiling and Foil Shapes, a Beginner’s Guide Published on June 2nd, 2017 by Mark Chisnell, Land Rover BAR The rules covering the design and construction of the team’s America’s Cup Class (ACC) boat...

Design Criteria for Boat Ramps - Tangent

Design the Boat Ramp’s Width and Alignment The other two-dimensional factors besides slope and depth are width and alignment. You must provide ample width on the ramp so that people can comfortably maneuver their vessels and vehicles while on it.

The best superyacht design features guide Yachting Pages

July 01, 2020 The best superyacht design features guide Fashion, décor, colour schemes and the latest must-haves change to meet expectations and developing habits, and the design and use of superyachts is no different. Despite the perception that superyachts are super for a reason, there are many limitations; space is one of them.

Boat design philippines Guide ~ Sailing Build plan

Apr 06, 2015 . Small boat design - united states agency for international, Small boat design. the proceedings of the iclarm conference on small boat design, noumea, new caledonia, october 27-28, 1975,-edited by Storer wood and plywood boat plans, Wooden and plywood boat plans for amateur boatbuilders – excellent performance, simple construction, detailed step by step …

C&C Design — Designer - Sailboat Guide

C&C Design. (Originally Canadian Northern Company 1952-1960. Then Cuthbertson & Cassian LTD from 1961 to 1969. C&C Design began in 1969) The design team was George Cuthbertson, by training a mechanical engineer, and George Cassian, an aircraft designer. When the Partnership was formed in 1969.

Frequently Asked Questions

What are the pros and cons of superyacht hull design?

In this guide to superyacht hull design, we break down the specs, must-know information and outline all of the pros and cons of the typical superyacht hull shapes. Increase stability by reducing weight (if the centre of gravity remains the same) a heavy boat is not necessarily more stable
How do we design the underwater volume of a hull?

We design the underwater volume of a hull to be distributed in a way that matches the optimal fore and aft center of gravity of the assembled boat plus her occupants and gear. This “center of buoyancy” is the volumetric center of the shape of the underwater part of the hull.
Why do we need to quantify hull shapes?

As in nature, beauty is a by-product of function, so naval architects need ways to quantify hull shapes in order to optimize them for performance, seaworthiness and fairness for buildability. How do we develop and quantify these compound curves?
What makes a well-designed hull form?

The beauty of a well-designed hull form is one result of the constantly evolving surface curvature from bow to stern. As in nature, beauty is a by-product of function, so naval architects need ways to quantify hull shapes in order to optimize them for performance, seaworthiness and fairness for buildability.