Jim Engineering Design Guide

Listing Results Jim Engineering Design Guide

Frequently Asked Questions

• What are engine engineering design guidelines?

  Engineering Design Guidelines are typically a collection of multiple industry references which need to be reviewed by an operations personnel or design engineer when designing or specifying a piece of equipment such as a control valve, relief valve or heat exchanger. The references at times can almost seem to contradicted each other.

• How to prepare an engineering design?

  Preparing an Engineering Design ‹The following basic steps should be followed for all engineering designs (regardless of complexity): 1. Identification of the problem and its scope. 2. Site Investigation. 3. Collection of basic design data. 4. Assembly and analysis of data. 5. Design.

• What are the Recommended Practices for general design?

  RECOMMENDED PRACTICES General Design •Use minimum Road Standards needed for safety and traffic use (Table 4.1). •Use Standard Plans and Specifications, with Standard Drawings, for most typical construction work. Develop Special Project Specifications and Drawings for unique types of work.

• What are the general design guidelines for road construction?

  General Design •Road construction on steep side slopes. •Side-casting material on cross-slopes steeper than 50 to 60 %. •Burying stumps, logs, slash, or organic debris in the fill material or in the road prism. •Construction and resource extraction activities during periods of wet weather (seePhoto 4.8).

• What is the drying process?

  The drying process requires a source of heat and a sink that receives the vapor produced. The term drying is also applied to the removal of water vapor from a gas or mixture of gases. In scientific terms, drying is described as a "mass transfer" process. The process that leads to extreme drying is called desiccation .

• Why choose our heating and drying ovens?

  Your laboratory oven is an invaluable part of your daily workflow, enabling simple glassware drying to the most complex, controlled heating applications. Our heating and drying ovens portfolio ensures temperature stability and reproducibility for all your desired application needs.

• Does the drying process of a molecular sieve consume energy?

  This drying process is consumes energy. This case study treats the possibility of heat integration including heat storage tanks in the drying process of a molecular sieve. This drying process is done in two steps: first, hot dry air is blown into the molecular sieve. It leaves the molecular sieve after being charged with water vapor.

• What is the process of Biomass drying?

  Drying process carries out at around 100°C. In the drying process, moisture contained in the biomass is vaporized to form steam. Drying processes are commonly used for food and agriculture’s industry to maintain a rising variety of foods.