Kabelkom Use Manual

Listing Results Kabelkom Use Manual

Frequently Asked Questions

• How do I adjust the bandwidth of my CATV equipment?

  To edit the bandwidth, press the BWsoft key. The bandwidth can be adjusted by using the up and down diamond keys or by entering a value using the numeric keypad and then pressing the Enterkey. The FCC specification for C/N measurements is a bandwidth of 4.2 MHz. CATV organizations outside of the United States may have different requirements.

• Why choose isolved benefit services as part of Kabel business services?

  As part of the acquisition of Kabel Business Services, customers now have access to solutions available from isolved Benefit Services. isolved Benefit Services has been a leader in the COBRA and benefits administration industry since it started in 1986.

• Is this manual proprietary to Wavetek Wandel Goltermann?

  This manual contains information proprietary to Wavetek Wandel Goltermann. The information in this document is not to be used in any manner without the prior approval, in writing, of Wavetek Wandel Goltermann.

• What is a leak tesing instrument?

  T8980 is the instrument designed to perform industrial leak tesing in pressure on parts using the compliance system. The practical example more popular and explanatory is that of loss measurement of the valves shutter: the air is introduced from a side and the leakage is intercepted from the opposite side.

• What is leak measurement?

  Leak measuring by the differential pneumatic circuit represented till 80's the most ingenious artifice in this field in order to put a remedy to the poor precision of sections of measure and electronic acquisition available until then. Form the other one an identical piece, but a tight one.

• How does the automatic air leak test work?

  The automatic air leak test equipment creates a rush or pressure difference between the area considered hermetic and the exterior of the body to be tested. Each system can perform this test with different methodologies.

• What is industrial leak testing?

  The industrial leak testing The leak testing (or " leak test ") is the industrial proceedings necessary to verify and to measure the pneumatic tightness of the produced components. Particularly this document is made for the technicians employed to the end line testing of serial products.