Kaden Use Manual

Listing Results Kaden Use Manual

Frequently Asked Questions

• What is the model number of Kaden air conditioner?

  KD36 | KD42 | KD48 | KD60 2| Kaden Installation Manual Kaden Installation Manual | 3 Table of contents Important note Read this manual carefully before installing or operating your new air conditioning unit. Make sure to save this manual for future reference. 1. Safety precautions 4 Note about fluorinated gases 5 2. Accessories 6 3.

• What should I do if my Kaden air conditioner is not working?

  Stop the air conditioner. Turn off the main power switch and reinstall the test cover. NOTE: If the unit malfunctions or does not operate according to your expectations, please refer to the Troubleshooting section of the Owner’s Manual before calling customer service. Kaden Installation Manual | 33

• How do I Turn Off the clock on my Kaden remote controller?

  10| Kaden Remote Controller Manual TIMER OFF function The TIMER OFF function allows you to set a period of time after which the unit will automatically turn off, such as when you wake up. 1. Press the Timer button, the Timer off indicator“ “ displays and flashes.

• What is the voltage rating of Kaden rg66a1?

  Remote controller Specifications Model RG66A1/BGEF Rated Voltage 3.0V (Dry batteries R03/LR03×2) Signal Receiving Range 8m Environment -5ºC~60ºC J3498_Kaden_Controller Manual_280817.indd 4 30/08/2017 5:02 pm

• Is there a 4 Kaden installer's manual for evaporative air coolers?

  4 Kaden Installer's Manual Evaporative Air Coolers This page intentionally blank 5 READ ALL INSTRUCTIONS BEFORE INSTALLING OR USING THE APPLIANCE. Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.

• How to install a Kaden wireless Networker?

  • Draw the wires from the wall cavity and feed them through the opening in the backing plate, connect the cable to the terminal connections on the backing plate before mounting it on the wall and re-assembling the Networker. • Connect the cable to the Networker connection lead terminal block at the Cooler. 7.2 WIRING THE Kaden MANUAL WALL CONTROL

• How to wire a Kaden cooler to the wall?

  • Connect the cable to the Networker connection lead terminal block at the Cooler. 7.2 WIRING THE Kaden MANUAL WALL CONTROL After the Cooler’s power supply and pre-wired wall control leads are fed down from the base into the roof cavity, connect the 20-metre wall control loom plug to the cooler’s lead plug.

• How does the Kaden wall control work?

  2.3 INSTALLING THE WALL CONTROL The Kaden Networker and Manual Wall Controls are part of a sophisticated control system. Controllers with Auto mode constantly monitor the temperature inside the house, switching the Cooler ON and OFF to maintain the target comfort level selected.