Library. Access a collection of product and technical literature that addresses challenges and solutions in the oil and gas, chemicals, power, water and general industries. Step into the Flowserve Library and explore a collection of brochures, catalogs, user instructions and other resources that represents our company’s wide-ranging expertise ...
Show more
See More
Kammer Control Valves. 5 Method of operation (actuators with integral Kämmer positioner) 5.1 P/P Actuator. The actuator with integrated pneumatic positioner works on the force balance principal, which ensures that the position of the actuator stem is proportional to the value of the input signal (see figs. 1 and 2).
Show more
See More
Kammer Linear Globe / Angle Control Valves. Since 1966, Kammer valves have been engineered and manufactured for challenging applications. Kammer is perfect for custom applications, due to the versatility and interchangeability of the Kammer design. Over half of all Kammer valves are custom designed, often at no additional cost.
Show more
See More
Flowserve Kammer 132000 Series 7 Flow Control Division Kammer Control Valves 13 STEM The valve stem. is equipped with a blowout protection feature. This ensures that the valve stem cannot be removed from the top of the valve. This is an important safety factor when the actuator is removed from the valve, because there would be otherwise no ...
Show more
See More
Flowserve Kammer. Kammer valves are designed to handle a wide range of service conditions: pressures from vacuum to 6000 psi and temperatures from minus 500° F to plus 752° F. Body materials include all common stainless steels, in addition to plastics and exotic alloys. Kammer valves are also applicable in applications that require zero stem ...
Show more
See More
Since 1966, Kammer valves have been engineered and manufactured for challenging applications. Kammer is perfect for custom applications, due to the versatility and interchangeability of the Kammer design. Over half of all Kammer valves are custom designed, often at no additional cost.
Overall, FLOWSERVE Kämmer valves are designed to handle a wide range of service conditions: pressures from vacuum to 60,000 psi and temperatures from -50 °F to 800 °F. Body materials include all common stainless steels, in addition to plastics and exotic alloys.
The Flowserve Kämmer design includes a rugged hydro-formed bellows seal with the backup packing seal located well above the bellows. For maximum protection, Kämmer offers bellows with up to five walls with wall thickness from 0.1 to 0.15 mm (for greater wall flexibility) for pressures up to 0 bar.
FLOWSERVE Kämmer actuators feature a multiple spring design for improved safety of the fail-safe mode, and for easily increasing thrust capabilities. 50 Series electric actuator for those applications requiring precise positioning and low maintenance, FLOWSERVE Kämmer offers a rugged and compact electric actuator.