4.1.1 Open and close the valve, and observe the movement of the actuator stem. The movement must be smooth and linear. 4.1.2 Check for maximum stroke through change of signal (for pneumatic positioners, 0.2 - 1.0 bar or corresponding split …
Show more
See More
Library. Access a collection of product and technical literature that addresses challenges and solutions in the oil and gas, chemicals, power, water and general industries. Step into the Flowserve Library and explore a collection of brochures, catalogs, user instructions and other resources that represents our company’s wide-ranging expertise ...
Show more
See More
4.1Open and close the valve, and observe the movement of the actuator stem. The movement must be smooth and linear. 4.2Check for maximum stroke through change of signal (for pneumatic positioners, 0.2 - 1.0 bar or corresponding split …
Show more
See More
Flowserve Kammer 132000 Series 7 Flow Control Division Kammer Control Valves 13 STEM The valve stem. is equipped with a blowout protection feature. This ensures that the valve stem cannot be removed from the top of the valve. This is an important safety factor when the actuator is removed from the valve, because there would be otherwise no ...
Show more
See More
It controls devices such as scalers, video displays, audio amplifiers, Blu−ray players, sensors, screens, shades, door locks, and lights. Multiple Kramer Ethernet control gateways can be used to add remote I/O ports.
Safety Instructions Caution: There are no operator serviceable parts inside the unit Warning: Use only the Kramer Electronics power supply that is provided with the unit Warning: Disconnect the power and unplug the unit from the wall before installing Recycling Kramer Products
Kramer Electronics Ltd. SL-240C – Protocol 3000 28 Protocol 3000 The SL-240CMaster / Room Controller & Kramer Control Brain can be operated using the Kramer Protocol 3000 serial commands. The command framing varies according to how you interface with a device.
To comply with the WEEE Directive, Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility.