What is the power rating of the Carver M-500?

The power rating of the Carver M-500 is 250 watts per channel from 20 to 20,000 Hz into 8-ohm loads with no more than 0.05 per cent total harmonic distortion. The 1HF A-weighted output noise is rated at better than 100 dB below rated power.

What are the dimensions of the Carver C-1?

The Carver C-1 is 19 inches wide, 3-1/2 inches high, and 10 inches deep. It is available in two versions: in an all-black finish with the panel edges slotted for rack mounting and in a pale-gold finish without the rack-mounting provision (both units have handles). The C-1 weighs 6 pounds.

How much does a carver preamplifier cost?

The price of the Carver M-500 is $550. It carries a three-year warranty, including parts, labor, and shipping costs one way. The Carver C-1 preamplifier required 55 millivolts (mV) at its high-level inputs for a reference output of 0.5 volt. The phono i sensitivity was 0.9 mV (phono 2 was not measured).

Karver Specs - Finder Manual

Q: What is a Karver Furler?

The “model” is a KARVER furler of 3rd generation and is fitted as standard with a carbon / Kevlar®continuous line wheel, a reinforced ABS casing protected by K Krok protection, our 2 in 1 K Snap snap shackle, our remote locking system for the continuous line wheel and a swivel also protected by our K Krok impact-resistant protection.

Listing Results Karver Specs

About 18 results and 4 answers.

Biocide: Karver Island system requirements for PC, minimum

Minimum:
Processor: Intel (R) Core (TM) i5-9600K CPU @ 3.70GHz
Graphics: GTX 1070
Storage: 6 GB available space

Deck equipment for racing, cruising and ... - Karver systems

KARVER reserves the right to modify its rates according to currency fluctuations, raw materials or cost price. 5. Article five: Orders 5.1. The general conditions of sale apply to all sales, by signing the order, the customer accepts unconditionally the conditions of sale and waives any application of its General Conditions of Purchase. 5.2 ...

Biocide: Karver Island system requirements for PC, minimum

Minimum: Processor: Intel (R) Core (TM) i5-9600K CPU @ 3.70GHz Graphics: GTX 1070 Storage: 6 GB available space

KF STANDARD - Karver systems

The KF Standard range is the version that will suit as many people as possible whether you are a cruiser or a racer. The “model” is a KARVER furler of 3rd generation and is fitted as standard with a carbon / Kevlar®continuous line wheel, a reinforced ABS casing protected by K Krok protection, our 2 in 1 K Snap snap shackle, our remote ...

KF4.5 FURLER - STANDARD VERSION - Karver systems

The STANDARD KFR4.5 is a furler that can withstand a workload of 4.5 T. It is intended for sailboats from 40 to 55 feet. The KF4.5 is a KARVER furler of 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K Krok protection, our 2 in 1 K Snap snap shackle, our remote locking system for the continuous line …

KWS40 WINCH EXTRA SPEED 40 - Karver systems

Strengths. – 2 winches in 1 : 2 standard speeds and 2 additional very high speed speeds. – 6 times faster than other winches on the market (equivalent headstock size) : 1 turn of the crank = 65 cm against 15 cm (30 cm on a 3-speed winch) – …

Five Ten Karver Flat Pedal Shoe - Reviews, Comparisons

Five Ten KARVER Flat Pedal Shoe: Riding Type: Freeride / Bike Park, Downhill, Dirt Jump / Slopestyle Rider: Unisex Construction: Action leather uppers Rubber Type: Steath S1 Sizes: 7-12, 13 Colors: Smokey Blue, Red/Black, Ash Grey (Women's) Weight: 1 lb 3.2 oz (545 g) Miscellaneous: Women's model does not have lace cover Price: $124.59 More Info: Five Ten …
Construction: Action leather uppers
Rider: Unisex
Product: Five Ten KARVER Flat Pedal Shoe

Karver KPW – Power Winch Range Solo Sails Sailmakers

Description. The KPW is an innovative 4-speed automatic winch and very (very) performance oriented: 2 speeds identical to other winches on the market and 2 extra speeds extremely powerful … 3 times more powerful than any other winch on the market. For example, the KPW110 has the same dimensions as a winch of 40 (base 170 mm) but the power of a winch 2 to 3 …

OPTION KFH10.0+ - Karver systems

OPTION KFH10.0+. KFH10.0 hook compatible with the KF10.0 series furlers. We always sell complete sets (swivel + drum). Consequently, the reference “Option KFH” makes it possible to replace the standard swivel with a KFH swivel hook. It therefore incorporates the capital loss of the swivel. A KFH hook is a 2-in-1 external hook.

Karver KF5 Furler - Solo Sails Sailmakers

Jan 17, 2014 . £ 2,881.93 £ 2,478.46 EXCLUSIVE ADVANTAGES OF KARVER FURLERS FURLING DRUM: KARVER’s furlers have a notched self locking wheel to make the continuous line smoothly grip the wheel. The mechanism is made of V-shaped, angle less grooves to avoid the wear on the rope while assuring an optimum movement even when the rope is not under load.
Category: Code Sail Furlers, KARVER
Availability: In stock

KARVER KF Code Zero Furler, KF2 - West Marine

Drum Diameter 4 19/32", Lower Unit Height 5 27/64", Swivel/Shackle Dia. 1 15/16",Pin Diameter 13/32", Wt. (Oz.) 31.5, MWL (lb.) 5,511, Breaking Strength (lb.) 11,023 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. Advice

3:1 FRICTION SHEAVE KF8.0 - Karver systems

Long x Width x Thickness (mm) 20. 92,7 x NC x 62. The datas are presented as an indication and are not contractual. Strengths. – The 3: 1 is delivered as standard on the Racing KFR version. – Available as an option on the other versions. – Practical and fast thanks to its quick captive axle.

Carver Technical Specifications The 100% electric urban

Max power 2 x 2 kW Max torque 2 x 150 Nm Acceleration 0-45 km 8 sec Battery Battery type Lithium Ion Battery capacity 5.4 kWh Charging time 80% ca. 4 hours Charging time 100% ca. 5 hours Various Luggage compartment 75 Liter Soft Top Cabriolet Electric windscreen defroster Glass side windows (removable) Specifications Performance Top speed: 45 km/hr

Carver Amplifier and Carver Audio Product Specs and

Carver Sound and Audio: Carver Amplifier and Carver Audio Product Specs and Information Carver Sound and Audio Carver Amplifier and Carver Audio Product Specs and Information

Karver 52 4-Speed S/T Ultra Speed Winch Upffront

The drum is constructed in hard anodized aluminium, gears and clutch in 17.4 PH stainless steel and copper aluminium alloy and needle bearings in polyoxymethylene. All winches are self-tailing, enabling single handed sail trimming. All Pontos winches by KARVER feature a 5 year warranty. Accessory Products:

X-KARVER PRO – Madd Gear

The Madd Gear X-KARVER Pro 3 in 1 Scooter with Light-up Front Wheel is designed to transform into three different scooters with unique riding modes! Super easy to assemble, the X-KARVER Pro will be ready to ride in minutes! Product Specifications : 3-in-1 Action - Scissor, Scoot and Carve modes. Quality steel frame construction is light and durable!

Karver 110 4-Speed S/T Ultra Power Winch - Upffront

Carver Amplifier and Carver Audio Product Specs and

Frequently Asked Questions

What is a Karver Furler?

The “model” is a KARVER furler of 3rd generation and is fitted as standard with a carbon / Kevlar®continuous line wheel, a reinforced ABS casing protected by K Krok protection, our 2 in 1 K Snap snap shackle, our remote locking system for the continuous line wheel and a swivel also protected by our K Krok impact-resistant protection.
What is the power rating of the Carver M-500?

The power rating of the Carver M-500 is 250 watts per channel from 20 to 20,000 Hz into 8-ohm loads with no more than 0.05 per cent total harmonic distortion. The 1HF A-weighted output noise is rated at better than 100 dB below rated power.
What are the dimensions of the Carver C-1?

The Carver C-1 is 19 inches wide, 3-1/2 inches high, and 10 inches deep. It is available in two versions: in an all-black finish with the panel edges slotted for rack mounting and in a pale-gold finish without the rack-mounting provision (both units have handles). The C-1 weighs 6 pounds.
How much does a carver preamplifier cost?

The price of the Carver M-500 is $550. It carries a three-year warranty, including parts, labor, and shipping costs one way. The Carver C-1 preamplifier required 55 millivolts (mV) at its high-level inputs for a reference output of 0.5 volt. The phono i sensitivity was 0.9 mV (phono 2 was not measured).