Kitchen Display System (KDS) The RES KDS system is composed of the Restaurant Display Controller (RDC) or the Kitchen Display Controller (KDC) 210, server based software, and one or more PC based clients coupled with touch or non-touch based LCD monitors and bumpbars that act as remote video displays. A typical KDS system is composed of the RDC or KDC 210, …
Show more
See More
KDS-8 Quick Start Guide This guide helps you install and use your KDS-8for the first time. www.kramerav.com/downloads/KDS-8 to download the latest user manual and check if firmware upgrades are available. Step 1: Check what’sin the box KDS-84K SDVoETMTransceiver 12V DC power adapter 4 rubber feet Quick start guide
Show more
See More
ROL200 MAN KDS is equipped with a rear clamp in order to tighten the tool in reverse way and bend complicated profiles. Intermediates and Punch Adapters. Rolleri intermediates and adapters for punches. ROL200 MAN Extreme. Manual upper fast clamping system with front clamp for Type R1 tools, 150mm/5.90" length. Max. load 1000 kN/m/33 US-Tons/ft.
Show more
See More
Each panel on the KDS Display is accessed using a panel toggle button on the tool bar or bump bar. The active panel on the KDS Display shows a border to indicate that it is selected. Split screens works in both chit mode and list mode.
A typical KDS system is composed of the RDC or KDC 210, LCD touch monitor or non-touch LCD monitor, and MICROS 10 or 20 Key Wired or Wireless Bumpbars.
7. Click the Order Device tab, select the revenue center, and then configure the order device settings for the revenue centers associated with the kitchen theme. The same settings that are in the Order Devices module appear here. For field and option descriptions, see Creating a KDS Order Device.
Configuring KDS Displays to Show One Course at a Time If the property uses dining courses, you can configure the KDS to show only one course at a time. That is, menu items from course 2 appear on KDS Displays only after menu items from course 1 are bumped.