Man-1079 Syncro GUIDE. Graphical User Interface (for fire) Detection Equipment. Download. Man-1092 Syncro View. Local LCD Control Panel Repeater. Download. Man-1096 Syncro AS (Main) Single or Two Loop Analogue Addressable Fire Control Panels . Download. Man-1100 Syncro AS (User)
kentech
Show more
See More
Kentech Instruments’ products are well suited for applications such as: Laser pulse shaping. Driving laser diodes. Triggering. Driving high-speed cameras. Testing of EMC. LINAC injector drive. Deflecting particle beams. Testing ultra-fast detectors.
Show more
See More
The following documents are included in the Kentec Taktis Documentation Set. Taktis Fire Alarm Control Panel Installation Guide - Hochiki Protocol. Taktis Network Vision Annunciator Information Guide. Taktis Network Module (S723) Information Guide. Dual Loop Panel Module (S758) Information Guide. 16 Channel I/O Interface (S560) Information Guide.
Show more
See More
M-326 Mainboard - User's Guide (80386/80486 motherboard) (uses SARC chipset) ... The Kentech multi-function card labelled as "AT MULTI I/O PLUS CARD", ... Precision Instruments CARDVLB-C This appears to be a rebadged Tekram DC-680C. User's Manual
Show more
See More
Photonics Buyers' Guide / Cameras & Imaging / X-Ray Cameras / Kentech Instruments Ltd. Kentech Instruments Ltd. Isis Building Howbery Park Wallingford, Oxon OX10 8BD England. Phone: +44 1491 821601. Fax: +44 1491 821602. Call Now Visit Website.
Show more
See More
Kentech Instruments Ltd. introduces its high rate imager, featuring an 18-mm microchannel plate intensifier tube to produce high-resolution images with an optical impulse gate width of 500 ps at a repetition rate to 1 MHz and jitter <20 ps. The intensifier tube has sensitivity from the near-IR to the UV and is available with single or double ...
Show more
See More
To capture targets that undergo ignition and thermonuclear burn, however, cameras with tenfold faster shutter times are needed. A collaboration between LLNL, General Atomics and Kentech Instruments has resulted in the design and construction of an X-ray camera with a shutter time shorter than ten picoseconds.
Show more
See More
PULSE GENERATOR. Kentech Instruments Ltd. has added the HMP2 to its line of subnanosecond kilovolt pulse generators. Each of the two ultrafast pulse outputs has an amplitude of >4 kV. The waveform is a fast rising edge with a 10 to 90% rise time of <100 ps and a slower exponential decay. The trigger- to-pulse out-timing jitter is <10 ps rms, and the timing …
Show more
See More
Kentech Instruments Ltd. was established in 1983 by a small group of university scientists. It specialises in the manufacture of high voltage fast pulse generator systems and …
Show more
See More
Introduction Man-1170EN Rev.01 Additional Boards Installation Manual If You Need Help If you need technical support contact Kentec Electronics at + 44 (0) 1322 222121 or e-mail the department, [email protected]. Kentec Electronics technical support is available Monday through Friday, 8:00 AM to 5:00 PM.
• The characteristics of the detection zone inputs have been designed to carefully match those of Kentec K3000 series conventional control panels and as such can be used as direct replacements for these or in any situation where K3000 control panels would be suitable. • The trigger resistance required to activate the zone is nominally 470 Ohms.
Kentec Electronics provides a test and repair facility for most standard and special build products. This facility can also recondition control panels, subject to availability of components. Customer Repairs Items for repair shall be returned to the Customer Service Department of Kentec Electronics.
These warranties are between Kentec Electronics (the Seller) and the company that placed the order upon the seller (the Buyer). The warranty period is valid for 36 months from the delivery date and is non-transferable. Damaged Goods