Over Wifi: Open wifi settings on your computer/phone and connect to Kerlink Miner access point (look for a wifi network named “Kerlink Miner”). Use wifi password is the MAC ADDR printed on the back of the device without the “:” For eg MAC ADDR 70:76:FF:02:AB:CD will be entered as “7076FF02ABCD”.
Show more
See More
Go to admin/network, wait for wifi list, select the Home WiFi network that you want the Kerlink device to connect to , enter Home Wifi password and Save configuration. (See screenshot below) The Kerlink device will now connect to your Home Wifi network; Connect via Cellular 4G (only available on iFemtoCell-Evolution and iStation) Insert SIM.
Show more
See More
Furthermore, with every new Connection, the encryption of the Data transmission is renewed. The biggest advantage however is that changes to the Network have no effect on the connectivity of the sensors. Therefore, we recommend our costomers to …
Show more
See More
Kerlink IOT Station Guide¶ Preparation:¶ Go to the address https://github.com/resiot/gateway-Kerlink-iot-station and download the correct file for the server you have been assigned. Also, make sure your gateway now has internet access otherwise after installing, the packet forwarder won't be able to connect to the ResIOT server.
Show more
See More
Kerlink IBTS Guide Supported models As of April 2020, this version targets the Kerlink IBTS listed at the official Kerlink website. Requirements The iBTS firmware version must be equal or lower than v.3.4.7 (April 2019) Download Installation Access your gateway via SSH using port 22 and the gateway's IP address obtained from the DHCP server.
Show more
See More
between the radiator (antenna) and user’s/nearby person’s bo dy at all times.
Show more
See More
User manual instruction guide for LoRa gateway for IoT chain KLK915WIFC Kerlink SA. Setup instructions, pairing guide, and how to reset.
Show more
See More
Kerlink Miner supports three main networks: 4G, the Internet, and public radio waves, so it can be used both indoor or outdoor. How far will the signal to Kerlink Miner ? Kerlink Miner coverage all over the world except the Middle East and India. Outdoor radios with sectional antennas will cut off a very strong connection.
Show more
See More
Get first-class performance, robustness, scalability and simplicity of use with Kerlink best LoRaWAN IoT Solutions, designed to cost-efficiently power public and private IoT networks. The leading global provider of IoT connectivity solution, Kerlink offers a comprehensive portfolio of carrier-grade LoRaWAN outdoor gateways and industrial-grade LoRaWAN indoor gateways, …
Show more
See More
Troubleshooting guide General Information The gateway contains the Kerlink OS called KerOS, and on top of that the Helium software (composed of an Erlang runtime package and the Miner for the full miner, or the Light Miner package). The software is automatically and remotely managed, it is not user serviceable. You don't need to worry about it.
Show more
See More
Wirnet Station. The Wirnet Station is a robust, performant and highly reliable outdoor LoRaWAN gateway for smart IoT network. Introduced in 2014, the Wirnet Station was the first LoRaWAN gateway commercially available on the market worldwide. This gateway is since a leading reference for the deployment of resilient public and private operated networks.
Show more
See More
Jan 24, 2022 . Kerlink recommends using a validated USB dongle (contact your reseller to have the list of validated USB dongles). The alternative dongle may require additional drivers and firmware updates to be used. To optimize the radio performances, when possible, Kerlink strongly recommends to dissociate the antennas (LoRa and
Show more
See More
Go to admin/network, wait for wifi list, select the Home WiFi network that you want the Kerlink device to connect to , enter Home Wifi password and Save configuration. (See screenshot below) The Kerlink device will now connect to your Home Wifi network; Connect via Cellular 4G (only available on iFemtoCell-Evolution and iStation) Insert SIM.
Show more
See More
IME Kerlink Wirnet iStation 868 Gateway: Frequently-viewed manuals. Huawei EchoLife HG552a User Manual Operation & user’s manual (37 pages) Linksys WAG54G Install Manual Quick installation (2 pages) Arris Touchstone TG952 User Manual Operation & user’s manual (56 pages) Arris NVG37X Quick Start Manual Quick start manual (2 pages) Siemens ...
Show more
See More
Kerlink Kerlink KerOS based gateways. KerOS is used by Kerlink on the following gateways: Kerlink iBTS; Kerlink iFemtoCell; Kerlink iStation; Requirements. Please make sure that you have installed the latest KerOS firmware version. The steps below have been tested with KerOS v4.3.3. For upgrade instructions, please refer to the Kerlink wiki. SSH into the gateway
Show more
See More
The Kerlink Wirnet iStation is an outdoor LoRaWAN gateway that represents an evolution of the legacy Kerlink Wirnet Station gateway. It offers cellular (4G with 3G/2G fallback) and Ethernet backhauls, as well as fully integrated internal GPS, 4G and LoRa antennas. This page guides you to connect Kerlink Wirnet iStation to The Things Stack.
Show more
See More
The Kerlink Wirnet iStation is an outdoor LoRaWAN gateway that represents an evolution of the legacy Kerlink Wirnet Station gateway. It offers cellular (4G with 3G/2G fallback) and Ethernet backhauls, as well as fully integrated internal GPS, 4G and LoRa antennas.
The leading global provider of IoT connectivity solution, Kerlink offers a comprehensive portfolio of carrier-grade LoRaWAN outdoor gateways and industrial-grade LoRaWAN indoor gateways, best of breed LoRa Network Server, unique IoT Network Operation & Management tools, and value-added IoT applications like Geolocation and IoT Device Management.
• Kerlink recommends using a validated USB dongle (contact your reseller to have the list of validated USB dongles). Alternative dongle may require additional drivers an d firmware update to be used. away from the enclosure and the L oRa antenna by using a 1 meter extension cable.
It offers cellular (4G with 3G/2G fallback) and Ethernet backhauls, as well as fully integrated internal GPS, 4G and LoRa antennas. This page guides you to connect Kerlink Wirnet iStation to The Things Stack.