Lanbird Usermanual

Listing Results Lanbird Usermanual

Frequently Asked Questions

• How do I connect a rain bird LSP-1 to a 2-wire path?

  Splice the blue wires from a Rain Bird LSP-1 to the 2-Wire path in the same manner as the installation of a field decoder detailed above, completing the splices with an approved direct-bury splice kit. D Connect the ground wires from the LSP-1 to the grounding device

• How do I add Rain Bird valves to an ESP-LXD decoder?

  NOTE:Rain Bird residential valves (DV and JTV series) are not compatible with ESP-LXD decoders. Use Rain Bird commercial valves (PGA, PEB, GB, EFB-CP and BPE series). E If you do not see your valve type, select Custom; then press Next. F Press the + and – buttons to enter the switch code for your valves.

• How do I contact Rainbird customer service?

  If you have any questions or need personal assistance, give us a call toll-free at 1-800-RAINBIRD (1-800-724-6247) Monday through Friday from 5 AM to 5 PM Pacific Time. Select your model below: Select... Discontinued

• How do I set up my rain bird controller?

  When setting up the controller, enter the field decoder Addressin the master valve Addressfield. bNOTE: Rain Bird recommends use of a FD-101 for small pump start relays and a FD-102 for pumps 3/4 HP or greater. Declaration of Conformity

• Where can I find the access code for my Lantech machine?

  This download process is only available for Lantech machines shipping after September 1 2017. The Access Code is not generic. It is unique to the Serial Number of your machine. The information can be found on the ID Tag and on the Serial Number Label on your machine. It is also included in the Shipping Packet that is delivered with your machine.

• How secure is the Rain Bird LNK wifi module?

  Your WiFi network credentials are securely stored on the Rain Bird LNK WiFi Module, and cannot be accessed remotely by Rain Bird. What kind of data does this product send to Rain Bird? This product does not collect personally identifiable information. This product does collect key pieces information that will allow it to function correctly: 1.

• Where are my WiFi credentials stored in the Rain Bird app?

  Your personal WiFi credentials are only stored within the Rain Bird LNK WiFi Module so that it can connect to your network. The credentials in the Rain Bird app are masked with “***” for your security. These are “read-only”. If you attempt to backspace a character on the WiFi password, the entire masked password is erased.

• How do I use my rain bird controller in hotspot mode?

  Hotspot Mode is a simple remote access mode to your controller with the Rain Bird mobile app. To use this product in Hotspot Mode without programming the LNK WiFi Module to a local WiFi network, complete the following steps: 1. Press the button on the LNK WiFi Module and observe the LED flashing pattern alternating Red and Green. 2.