LBE-5AC-LR Quick Start Guide. Phillips screwdriver. 1C3licmkmfowr rench× Table7 omfmCosnotceknettswrench or screwdriver. Shielded Category 5 (or above) cabling with drain wire should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor …
Antenna Gain: 26 dBi
WeightWith MountWithout Mount: 1.360 kg (2.998 Ib)1.735 kg (3.825 Ib)
Show more
See More
7 mm socket wrench or screwdriver
Shielded Category 5 (or above) cabling with drain wire should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE.We recommend that you protect your n...
Surge protection should be used for all outdoor installations. We recommend that you use tw…
7 mm socket wrench or screwdriver
Shielded Category 5 (or above) cabling with drain wire should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE.We recommend that you protect your n...
Surge protection should be used for all outdoor installations. We recommend that you use two Ethernet Surge Protectors, model ETH-SP, one near the LiteBeam and the other at the entry point to the b...
Without Mount: 800 g (1.76 lb)
With Mount: 980 g (2.16 lb)
Show more
See More
LBE Quick Guide to Electric Vehicles Battery Electric Vehicles (BEVs) BEVs, also called fully electric vehicles, have batteries that are charged by plugging the vehicle into appropriate outlets or charging equipment. BEVs always operate in all-electric mode and do not have an internal combustion engine, fuel tank or exhaust pipe. They store electricity
Show more
See More
Nov 07, 2012 . 3 thoughts on “ The Ultimate ALICE Pack and LBE Guide ” Marcello 20August2013 at 2052. Since you compiled a lot of info from different forums on, I just refer people here who have alice packs and other LC-1 or LC-2 gear. Dirtpro Post author 21August2013 at 1031. Thanks! If you have any more tips feel free to submit them.
Show more
See More
LBE-M5-23. Dimensions. 347 x 260 x 208 mm (13.66 x 10.24 x 8.19 ") Weight. 0.7 kg (1.54 lb) Networking Interface (1) 10/100 Ethernet Port. Antenna Gain. 23 dBi. Max. Power Output. 25 dBm. Max. Power Consumption. 4W. Power Supply. 25V, 0.2A PoE Adapter. Power Method. Passive PoE (Pairs 4, 5+; 7, 8 Return) Operating Temperature-40 to 70° C (-40 to 158° F) …
Show more
See More
LBE-5AC-LR. Dimensions. 512.5 x 385.75 x 258.3 mm (20.18 x 15.19 x 10.17 ") Weight With Mount: 1.360 kg (2.998 lb) Without Mount: 1.735 kg (3.825 lb) Networking Interface (1) 10/100/1000 Ethernet Port. Antenna Gain. 26 dBi. Max. Power Output. 25 dBm. Max. Power Consumption. 7W. Power Supply. 24V, 0.3A Gigabit PoE Adapter. Power Method. Passive …
Show more
See More
LBE Quick Guide to EV Charging Infrastructure Types of Electric Vehicle Supply Equipment (EVSE) for Charging General Charging Use Cases and Considerations Procurement Resources Highlight: New and Unique EVSE Technologies Fleet Charging Workplace / Employee Charging Public Charging •Chargers reserved solely for fleet EVs.
Show more
See More
* Only the single-pack of the LBE-5AC-Gen2 includes a PoE adapter. Read, follow, and keep these instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer.
Shielded Category 5 (or above) cabling with drain wire should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti.
We recommend that you use two Ethernet Surge Protectors, model ETH-SP, one near the LiteBeam and the other at the entry point to the building. The ETH-SP will absorb power surges and safely discharge them into the ground.
The ETH-SP will absorb power surges and safely discharge them into the ground. The LiteBeam AC mounted outdoors with the reflector installed provides directional outdoor coverage (gain reflector-dependent). The LiteBeam AC mounted outdoors without the reflector installed provides outdoor-to-indoor coverage using the 3 dBi Antenna Feed only.
The BD Pyxis ™ ES system Training Resource Tool Kit contains materials to assist with facility staff training and to support end users post-training. The Tool Kit includes training checklists, job aids, training activities, and assessments. These resources can be updated or customized as needed.
This curriculum provides end users, system managers, materials management, and material technicians with an overview of the BD Pyxis ™ SupplyStation ™ System v10. 4. BD Pyxis ™ SupplyStation ™ System v10.2 Console Reports Guide
Those who have been identified by their organization to enter information in the VDTS, will be provided with user access instructions by their organization’s approver. Every user is expected to complete the training before entering data into the system.
Follow the instructions to login or create a login. How to search: Use the Curriculum Finder tool to find training by product, version, and/or role. Download: Option to download web-based education via SCORM files. Click here for detailed information. Check with your Hospital’s training team for already downloaded BD Pyxis ™ training content.