Ldc Racing Saliboats Use Manual

Listing Results Ldc Racing Saliboats Use Manual

Frequently Asked Questions

• What do you think of the RS LDC 2000?

  Congratulations on the purchase of your new LDC 2000 and thank you for choosing an RS product. We are confident that you will have many hours of great sailing and racing in this truly excellent design. The LDC 2000 is an exciting boat to sail and offers fantastic performance.

• Is the LDC 2000 the right boat for You?

  4. SAILING HINTS 4.1 Introduction The LDC 2000 is a very rewarding boat to sail – to fully appreciate its handling; you should be comfortable with the basic techniques of sailing small boats. If you lack confidence or feel that a refresher is in order, there are many approved sailing schools which use the LDC 2000.

• How do I care for my LDC 2000?

  5.1 Boat Care The LDC 2000 is made from Polyester Resin and Glass fibre The boat should be supported ashore on an approved RS trolley, as the hull may distort if not supported properly. For long-term storage, it is better to support the boat on a rack, in slings, or another type of support that spreads the weight and avoids point loads.

• What tools do I need to commission my LDC 2000?

  In order to commission it, you will need the following tools:  Pliers or a shackle key  Small, flat-bladed screw driver  Small Pozidrive screwdriver (PZ 2)  8mm Spanner  PVC electrician’s tape Whilst your LDC 2000 has been carefully prepared, it is important that new owners should check that shackles and knots are tight.

• Is there a manual for the RS Vision?

  The RS Vision is an exciting boat to sail and offers fantastic performance. This manual has been compiled to help you to gain the maximum enjoyment from your RS Vision, in a safe manner. It contains details of the craft, the equipment supplied or fitted, its systems, and information on its safe operation and maintenance.

• Is the RS Vision the right boat for You?

  SAILING HINTS 4.1 Introduction The RS Vision is a very rewarding boat to sail – to fully appreciate its handling, you should be comfortable with the basic techniques of sailing small boats. If you lack confidence or feel that a refresher is in order, there are many approved sailing schools which use the RS Vision.

• How do I sail the RS Vision XL close-hauled?

  When sailing close-hauled, or as close as possible to the wind, it is important to get the boom as near as possible to the centreline, especially when sailing the RS Vision XL with the mainsail and jib. The kicking strap should be firmly tensioned for upwind work.

• What tools do I need to commission my RS Vision?

  Your RS Vision comes complete with all the components necessary to take the boat sailing. In order to commission it, you will need the following tools: • Pliers or a shackle key • Small, flat-bladed screw driver • Small Pozidrive screwdriver • 10mm Spanner • PVC electrician’s tape