MacDon FD70 for Combine Operators User Manual 1. Slowly drive combine up to adapter until feeder house saddle (C) is directly under the adapter top cross member (D). 2. Raise feeder house fully and engage combine header lift cylinder locks. F E G H J 3. Remove pin (E), and lower latch handle (F) ...
Drive: Hydraulic From Combine Hydraulic Oil Supply
Finger Tip Radius Range: 30.2-31.5 in. (766-800 mm)
Effective Reel Diameter: 65 in. (1650 mm)
Speed: 0-67 rpm
Show more
See More
Use this manual as your first source of information about the machine. If you follow the instructions given here, your header will work well for many years. If you require more detailed service information, a technical manual is available from your MacDon Dealer. The Table of Contents and Index will guide you to specific areas of this manual.
Show more
See More
World class equipment backed by world class support! Find everything you need to set-up, service, and maintain MacDon’s legendary harvesting performance. MacDon Operators Manuals, Parts Catalogues, Brochures, Set-up Videos, and more. Find it all here. Keep your MacDon at peak performance with MacDon Performance Parts.
Show more
See More
If you require more detailed service information, a Service Manual is available from your MacDon Dealer. The Table of Contents and the Index will guide you to specific areas. Study the Table of Contents to familiarize yourself with how the material is organized. Keep this manual handy for frequent reference, and to pass on to new Operators or Owners.
Show more
See More
MacDon D65 SP DHOM User Manual • Never start or move the machine until you are sure all bystanders have cleared the area. • Avoid travelling over loose fill, rocks, ditches, or holes. • Drive slowly through gates and doorways. • When working on inclines, travel uphill or downhill when possible. Be ...
Show more
See More
Check out MacDon’s full line of high performance combine header harvesting solutions. Experience the latest in innovative Windrowing technology with MacDon’s full line of Windrowers & Headers. Don’t limit your harvesting possibilities, see how MacDon Pull-Type Mowers will improve your harvesting efficiency.
Show more
See More
Use this manual as your first source of information about the machine. If you follow the instructions given in this manual, your M150 and M200 Windrower will work well for many years. If you require more detailed service information, check with your MacDon Dealer. Use the Table of Contents and the Index to guide you to specific areas.
Show more
See More
A manual storage case is provided in the cab. Keep this manual handy for frequent reference and to pass on to new Operators or Owners. Call your Dealer if you need assistance, information, or additional copies of this manual. CAREFULLY READ ALL THE MATERIAL PROVIDED BEFORE ATTEMPTING TO USE THE MACHINE. NOTE: Keep your MacDon publications up …
Show more
See More
This manual contains information on the MacDon Model M100 Self-Propelled Windrower that is designed to cut and lay in windrows, a wide variety of grain, hay and specialty crops. Windrowing allows starting the harvest earlier, protects the crop from wind damage, and gives you more flexibility in scheduling combine time.
Flow: 11.5 U.S. gpm (46.5 L/min)
Type: Hydraulic
System Pressure (Relief/Max): 2500 psi (17.24 MPa)
Show more
See More
MacDon FFT FD75 Pdf User Manuals. View online or download MacDon FFT FD75 Assembly Instructions Manual The active float system of the MacDon CA25 allows for instant response over all kinds of ground conditions. MULTIPLE APPLICATION. MacDon’s D65 Draper Headers can be used for direct cutting with most current model combines using the CA25.
Show more
See More
If you require more detailed service information, a Service Manual is available from your MacDon Dealer. Use the Table of Contents and the Index to guide you to specific areas. Study the Table of Contents to familiarize yourself with how the material is organized.
MacDon FD70 for Combine Operators User Manual 1 Raise feeder house fully, and engage combine header lift cylinder locks.#N#W#N#V#N#X 2 Remove pin (V), and lower latch handle (W) (one on each side of feeder house) to disengage latch (X). 3 Raise latch handle to “storage position”, and secure with pin (V). 4 Proceed to step k. below. More ...
This worry-free harvesting performance is ensured with MacDon’s 3-Year cutterbar warranty.
However, optional drive sprockets are available to change the auger speed to optimize auger performance. See your MacDon Dealer. For special conditions, 20T, 22T, and 26T sprockets are available to change adapter feed auger speed. Consult with your MacDon Dealer.
Our parts are designed to meet MacDon’s demanding performance specifications. They are tested in the toughest real-world conditions, ensuring the worry-free harvesting performance you’ve come to rely on with MacDon. Demand the best for your harvest.
For all other technical support issues, please contact MacDon Dealer Portal Support. MacDon Dealer Portal Support: Ph:1-855-644-3575
This worry-free harvesting performance is ensured with MacDon’s 3-Year cutterbar warranty.