Further guidance relating to other aspects of VectorPro can be accessed through this user manual. Mecmesin Long Travel Extensometer Installation Guide (431-969) Runs through the installation and operation of Long Travel Extensometers in conjunction with OmniTest systems. VectorPro™ User Manual - Introduction and Initial Setup (431-955)
Show more
See More
The BFG is supplied with a set of 4 Nickel Metal Hydride rechargeable AAA batteries, which are supplied fully charged to allow use straight from the box. Do not use any other battery charger other than that supplied with the force gauge.
Show more
See More
The MultiTest is a versatile tensile and compression tester controlled by software running on a PC (-i and -xt models) or as a motorised test stand (-dV model). Available in a range of capacities as both single and twin-column from 0.5 kN right up to 50 kN, it is ideal for product testing applications according to your own test methods.
Show more
See More
Thank you for choosing Mecmesin’s Advanced Force Gauge (AFG). With correct use and regular re-calibration it will give many years of accurate and reliable service. The Mecmesin AFG is the flagship member of a series of highly versatile display units.
Show more
See More
Mecmesin Software Certificate of Product Conformance (Emperor and VectorPro) Guide Installing Emperor 1.18-408 Software To install Emperor 1.18-408 software right click and run the Emperor setup.exe file as administrator and then follow the on-screen prompts. Connecting an AFTI or AFG to Emperor Lite software
Show more
See More
Tensile testing / tension testing, compression testing and torque testing machines from Mecmesin are used in R&D and quality control laboratories and manufacturing plants around the world to assess...
Show more
See More
User Manuals, Guides and Specifications for your Mecmesin MultiTest 2.5-i Laboratory Equipment. Database contains 1 Mecmesin MultiTest 2.5-i Manuals (available for free online viewing or downloading in PDF): Assembly and installation manual . Mecmesin MultiTest 2.5-i Assembly and installation manual (24 pages)
Show more
See More
This user manual covers the operation of MultiTest- dV force test stands in conjunction with the use of Mecmesin digital Advanced Force Gauges, ELS devices and extensometers. Operation of gauges and extensometers is covered in separate manuals for those products specifically. The following manuals may aid you in the use of your test stand:
Displacement: mm, in
Setting: Units Available
Force: N, gf, kgf, ozf, lbf, mN, kN
Speed: mm/min, mm/sec, in/min, in/sec
Show more
See More
This user manual must be read in full before operating the MLTE device. Please note: that throughout this user manual the device name ( Mecmesin Long-Travel Extensometer ) is shortened to MLTE . A Quick Connected ( QC) Fitting ( type C or type L) is required to fix the MLTE to all Mecmesin test stands, to enable the use of recommended grips.
Connector: 15-Way D-Sub
Resolution: 0.010 mm (0.0004”)
Minimum Gauge Length: 20 mm (0.787”)
Show more
See More
CETIE Guide 18 Guide 18 ... "Mecmesin, through their Portuguese supplier Egitron, presented us with a good solution: reliable equipment and user-friendliness that was adequate for our needs. All our operators are capable of using this equipment because it is very simple to operate. I enjoy dealing with Egitron because they offer excellent ...
Show more
See More
Mecmesin MultiTest-5i Manuals & User Guides. User Manuals, Guides and Specifications for your Mecmesin MultiTest-5i Test Equipment. Database contains 1 Mecmesin MultiTest-5i Manuals (available for free online viewing or downloading in PDF): Operating manual .
Show more
See More
Alcolizer WM4 User Manual Operation & user’s manual (41 pages) Mecmesin MultiTest 1-dV Operating Manual Operating manual (52 pages) Mecmesin Vortex-dV 1.5 N.m Operating Manual Operating manual (24 pages) Extron Electronics VTG 300R Brochure Brochure (4 …
Show more
See More
This section is dedicated to Test Equipment manuals & user guides which are included in the main list of categories. The page provides a catalogue of brands and devices, each offering to view or download an updated manual. To see the entire list of Test Equipment items designed by a particular manufacturer click on ‘More’ button.
Show more
See More
Each Mecmesin test stand is supplied with a dedicated ‘dovetailed mounting bracket’ and screws for this purpose. If you wish to mount to another type of stand, ensure that the screws used are threaded into the gauge to a maximum depth of 12mm. If screws are fitted beyond this depth, damage to the internal PCB or loadcell may occur.
The AFG must be powered down when connecting or disconnecting smart transducers. All Advanced Force Gauges have a 15-pin ‘Smart’ connector port on the left-hand side for interface with Mecmesin external ‘Smart’ force and torque sensors. This allows you to use your existing AFG to perform additional tests without the need for a dedicated instrument.
Connect the 15-pin D connector to the top socket of the AFG, and the opposite end of the cable to the RJ11 plug (marked 'Gauge'), located on the rear of the stand: For MultiTest- dV Mark 2 Interlock Enabled stands, a Mecmesin AFG digital force gauge is connected to the test stand using cable ( part no. 351-103).
Download copies of the traceability certificates relating to the verification equipment used by Mecmesin UK to calibrate your instruments. If you are based in the UK, Ireland or France you can arrange for our engineers to calibrate your Mecmesin force or torque tester.