Nanosurf is a Swiss based high-tech company providing scanning probe microscopes to customers around the globe. Our product range starts with very compact AFM and STM instruments, followed by state-of-the-art research atomic force microscope systems, all the way up to fully customized and comprehensive next‑level solutions.
spec
Show more
See More
The DriveAFM, Nanosurf‘s new flagship instrument, utilizes the latest technology to deliver stable, high-end performance. It was designed to fulfill the needs of top notch research, today and in the future: CleanDrive: stable excitation in air and liquid | Ultra-low noise | Direct drive: high-resolution imaging and large scan area | Fully motorized system: full control via software
Show more
See More
Ø380 mm x 220 mm. Stage size. 450 mm x 550 mm x 460 mm. Noise level. <0.5Å. AFM measurements on large concave or convex samples require the scan head to rotate such that the cantilever approaches the surface under the same angle on every location. Economic full 360° manual rotation of the sample platform and motorized.
Results: Export of final histograms and maps
Show more
See More
State-of-the-art-active vibration isolation system. Ideal isolation from building vibrations and other disturbances. Low-profile carbon-design, straightforward handling, easy operation. Isolation effect starts at 0.6 Hz and achieves max. performance of –40 dB at 10 Hz, where 99.0% of the vibration is isolated.
Analog signal input bandwidth: 0-5 MHz
X/Y/Z-axis position measurement: 1× 24-bit ADC (200 kHz)
Excitation & modulation outputs: 2× 16-bit DAC (20 MHz)
X/Y/Z-axis scan and position controller: 3× 24-bit DAC (200 kHz)
Show more
See More
1 day ago . Force spectroscopy is a practical nanomechanical technique to acquire both single point measurements and maps of key mechanical properties, including adhesion and stiffness (elastic modulus). Cantilever and tip calibrations paired with contact mechanics models facilitate the complete analysis and interpretation of individual force curves.
Show more
See More
Specifications The established microfluidic tool for nanomanipulation and single-cell biology FluidFM probe microscopy (FPM) combines the force sensitivity and positional accuracy of an AFM with FluidFM technology by Cytosurge to allow a whole range of exciting applications in single-cell biology and nanoscience.
Show more
See More
Product specifications; Silicon tip radius: R tip 10 nm: Cantilever length, width: L = 225 µm, W = 38 µm: Applications: Dynamic mode imaging; phase mode imaging; nanolithography: Resonant frequency: f 0 = 190 kHz (160 - 220 kHz) Stiffness: k = 48 N/m (28 - 75 N/m)
Show more
See More
Download version 3.10.0 of the Easyscan 2 control software. Click here or on the image below to download or run the installer. This control software version is compatible with Windows 7/8/10. Windows XP is no longer supported. The latest XP-compatible version is Easyscan 2 control software version 3.5.0.38 . For a detailed change log, see the ...
Show more
See More
Nanosurf System CoreAFM , Easyscan 2 AFM , FlexAFM , LensAFM , NaioAFM , NaniteAFM Static mode cantilever Product details A box of 10 cantilevers for static mode operation. With its gold reflection coating, it is suitable for operation in both air and liquid. The self-alignment grooves guarantee easy and reproducible mounting of the cantilever.
Show more
See More
Specifications Nanosurf Nanonis (Specs) The SuperFlat AFM combines the power of SEM and AFM. Information on lateral dimensions and material from in-situ inspection can be complemented by precise AFM topographical and frictional information.
Show more
See More
Jan 28, 2022 . Image Credit: Nanosurf AG The imaging of a Shakti lattice was conducted at its saturated state at -200 mT and in the magnetic behavior throughout the reversal process at -10 mT. Features 720 mT maximum field Built-in Hall sensor Programmable stepper motor to vary field strength with a resolution of 0.1 mT
Show more
See More
The DriveAFM, Nanosurf‘s new flagship instrument, utilizes the latest technology to deliver stable, high-end performance. It was designed to fulfill the needs of top notch research, today and in the future. CleanDrive: stable excitation in air and liquid; Ultra low noise: below 15 fm/√Hz; Direct drive: high-resolution imaging and large scan area
Show more
See More
Jan 31, 2022 . Through progressing main technologies and designs, Nanosurf has made the FlexAFM one of the highly versatile and flexible AFMs ever. This enables a vast range of research applications to be handled with comfort. Together with the strong C3000i controller, complicated material characterizations are possible. We have been using the FlexAFM system ...
Show more
See More
Jan 01, 1988 . Abstract A surface texture and profile-measuring stylus instrument, developed at NPL and called ‘Nanosurf 2’, which has a continuous dynamic horizontal range of 50 nm to 50 mm, is being used for sub-nanometre surface texture and profile measurement on a wide range of engineering, optical and semi-conductor surfaces.
Show more
See More
Group Photos. Nanosurf© easyscan 2 STM. Device Specifications:Ambient STM scan head. 60 ms/line max scan speed (at 128 points per line) Low current scanhead at 0.02 nA. 500 nm max scan area. +/- 10V potential range. Capabilities: The easyscan offers high quality images in an a surprisingly portable container.
Show more
See More
A surface texture and profile-measuring stylus instrument, developed at NPL and called ‘Nanosurf 2’, which has a continuous dynamic horizontal range of 50 nm to 50 mm, is being used for sub-nanometre surface texture and profile measurement on a wide range of engineering, optical and semi-conductor surfaces.
The Nanosurf easyScan 2 AFM is an atomic force microscope system that can make nanometer scale resolution measurements of topography and sev- eral other properties of a sample. Th e easyScan 2 AFM system is a modular scanning probe system that can be upgraded to obtain more measurement capabilities.
– Continuous approach Approach with continuous slow motorized stage movement until surface contact point is reached. Z-Axis stays at Tip-Position during approach. This is the default approach method, and was the only method available in the Nanosurf SPM Control Software before version 3.
The Nanosurf Report software offers a powerful and extensive set of analysis functions. Complex analyses can be created interactively, and then displayed and printed in visually appealing reports. These reports can then be used as templates to consistently apply the same analysis to other measurements.
Nanosurf AFMs are used for applications ranging from material characterizations to biological samples like live cells. On this page you can browse our atomic force microscopy images.
Nanosurf AFMs are used for applications ranging from material characterizations to biological samples like live cells. On this page you can browse our atomic force microscopy images. All AFM images were measured using Nanosurf AFMs; click through to read more about each application.
Nanosurf AFMs are used for applications ranging from material characterizations to biological samples like live cells. On this page you can browse the gallery of all our published atomic force microscopy images.
The Nanosurf LensAFM is an atomic force microscope that continues where optical microscopes and profilometers reach their resolution limits. It is mounted like a normal objective lens, thus extending the resolution and measuring capabilities of these instruments.