Nature’s Flame is a full-service natural heating specialist offering installation and maintenance as well as fuel, delivery, and parts and accessories. Shop Stoves Nature’s Flame (formerly Wood and Sons Corn Bin, LLC) carries a complete line of pellet , corn and wood burning stoves , furnaces and fireplace inserts and accessories .
Show more
See More
Information about the business: Todd and Loretta Benjamin own and operate Nature’s Flame. Having a firm belief in renewable energy and a desire to keep heating dollars local, we started Nature’s Flame in 2015. We have heated two homes, two shops and a cottage with corn stoves for over 11 years. We are committed to providing outstanding […]
Show more
See More
Unvented Natural Gas Vent Free Room Heaters1 Installation Instructions and Owner’s Manual MR. HEATER, INC., 4560 W. 160TH ST., CLEVELAND, OHIO 44135 · 800-251-0001 INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this manual for future reference. UNVENTED NATURAL GAS FIRED ROOM HEATER
Show more
See More
Nature’s Flame is a full-service natural heating specialist offering installation and maintenance as well as fuel, delivery, and parts and accessories. Nature’s Flame (formerly Wood and Sons Corn Bin, LLC) carries a complete line of pellet, corn and wood burning stoves, furnaces and fireplace inserts and accessories.
For natural gas, the control module allows up to 15 seconds to establish pilot flame. If flame is not sensed within 15 seconds, the control module will turn off the gas valve, flash the Flame light, and immediately start a new cycle. This will continue indefinitely until pilot flame is established or power is interrupted.
If flame is not sensed within 15 seconds, the control module will turn off the gas valve, flash the Flame light, and immediately start a new cycle. This will continue indefinitely until pilot flame is established or power is interrupted. Once pilot flame is proven, the control module opens the gas valve to allow main burner flame.
If flame is not sensed after 4 tries, control will lockout and flash all lights. Control must be manually reset to place back into service. Once pilot flame is proven, the control module opens the gas valve to allow main burner flame.