Navtec Spec

Listing Results Navtec Spec

About 19 results and 8 answers.

In continuous production for almost 50 years, Navtec was the pioneer and is still the leader in Hydraulic Systems for Sailboats. Navtec Hydraulic systems offer precise control and a significant sailing advantage for racers and cruisers. Whether your boat is a 30′ Cruiser, a Grand Prix race yacht or a 200 foot Superyacht, a Navtec Hydraulics system can be customized to meet your …

Show more

See More

Navtec Rod Rigging Hardware by Hayn Marine Select images below for specifications or select by the listing to the left for additional Rod Rigging products. Nitronic 50 Rod Rod Turnbuckle Assemblies N090 Rod Stud Rod Eyes, Jaws and Toggles Stemball / Nosings / Rod Caps / Spreader Bends

Show more

See More

Standard Light CAM Valve The Navtec Light CAM 3-position valve is the standard valve for use with a single acting M cylinder. Each manifold-mounted 7500 psi unit has an adjustable pressure relief valve, an optional flow control valve, and a non-interconnect check valve.

Show more

See More

Maximum reliability. Navtec standard cylinder rods are made from 316 stainless steel. Tubes, lower clevis and caps are made of black hard-coated aluminum. Cylinder bores are specially polished for longer seal life. Navtec stainless steel cylinders represent the highest standard of performance worldwide, with 316 stainless construction throughout.

Show more

See More

The high-resolution imaging and the 360° scanning capability, comes with an option of on board processing, which reduces infrastructure and bandwidth requirements. Its compact design allows for easy shipping, handling and installation, mounting it directly to a …

Show more

See More

Welcome to Navtec Expeditions a full service tour operator in Moab, Utah specializing in River Trips, Canyoneering and 4x4 National Park tours. Call us at 800-833-1278. Join Navtec Expeditions of Moab, Utah for an exciting half-day, one-day, or multi day white water rafting trip down the canyons of the legendary Colorado River.

Show more

See More

Nav-Tech Inc. offers a wide range of products such as Con Edison, National Grid / LIPA, Orange and Rockland approved equipment. Our product line includes Trans-S cabinets, Trans-S safety switch combination units, meter sockets, current transformer cabinets, full line of screw cover boxes and wireway, raintight enclosures, weatherproof enclosures, copper detail boxes, and …

Show more

See More

Nav-Tech Inc. Specifications for all Nav-Tech Inc. products. Nav-Tech Inc. is an electric distributor that offers a wide range of products such as Con Edison, National Grid / LIPA, Orange and Rockland approved equipment.

Show more

See More

Navtech Charts is a modern, user-friendly navigation product created through years of charting experience and combined with customer feedback. Our goal is to provide pilots with premium navigation aids onboard the aircraft. Navtech Charts have improved presentation of altitudes and presentations of take-off minima on aerodrome charts along with depictions of landing minima.

Show more

See More

OEM Sensors Technical Specifications - Navtech Radar Technical Specifications CIR and CAS Sensors for Industrial Automation and Autonomous Vehicles All-weather operation Rain, fog, dust and dirt Fire, smoke and hot gasses Water and spray Extreme temperatures Strong vibrations Robust sensor Unrivalled availability 360° field of view High-resolution

Show more

See More

35.7 in (907 mm) 8.9 lbs (4.04 kg) A260-LE-017. -17. 45.1 in (1146 mm) 11.1 lbs (5.03 kg) A260-SE-022.

Show more

See More

1/2 in (12.7 mm) 2.00 in (50.8 mm) A371-20A17A. 5/8 in (15.9 mm) 2.33 in (59.2 mm) A371-20A22. 3/4 in (19.1 mm) 2.98 in (75.7 mm) The A370 is supplied as standard with a black finish.

Show more

See More

The shortest range radar sensor, with a refresh rate of up to 4 times a second, the HDR100 series is ideal for high precision coverage of small areas. Examples include, sterile areas between fences, and areas with restricted line of sight. High Definition Radar Specifications HDR300 Series HDR200 Series HDR100 Series Supported cameras

Show more

See More

Specifications:piston rod diameter: 5/8 16mm clevis pin gap: 9mm final sale, sold as is: new with original Navtec paperwork. Navtecdiscontinued integral backstay adjuster part number: a370-ble-017...(posted on October 27th, 2017)

Show more

See More

Frequently Asked Questions

  • What is Nav-tech's product line?

    Our product line includes Trans-S cabinets, Trans-S safety switch combination units, meter sockets, current transformer cabinets, full line of screw cover boxes and wireway, raintight enclosures, weatherproof enclosures, copper detail boxes, and roughhouse boxes. Nav-Tech also has a new facility for custom fabrication.

  • Why choose Navtec expeditions?

    When you're looking for adventure, Navtec Expeditions offers the most comprehensive selection of Colorado River whitewater rafting and 4x4 trips in Southeastern Utah. You will travel with some of canyon countries most experienced backcountry guides aboard the best equipment. Loved the Side Hikes!

  • What are Navtec backstay cylinders made of?

    A250-le-017 Navtec Backstay Cylinder (55.3% similar) Navetec standard cylinder rods are made from 316 stainless steel. A250 cylinder:minimal weight.

  • What is this seal kit for on a Navtec hydraulic adjuster?

    This seal kit is for the repair of a Navtec hydraulicintegral backstay adjuster. This is for a Series 7 adjuster which has a squarebody with concave sides. Ignoring this warning could result in serious bodily injury ordeath.

  • Can Navtec hydraulics be used with Harken power packs?

    Navtec has worked closely with Lewmar and Harken to interface Navtec hydraulics into their winch/windlass hydraulic power packs. The major problem is that most powered units are 2000 - 3000 psi, where the Navtec systems is a 5000 psi system.

  • What is a Navtec hydraulic integral backstay seal kit?

    Only 2 left! This seal kit is for the repair of a -12 or -17 Navtec hydraulic integral backstay adjuster. This is for a Series 7 adjuster which has a square body with concave sides (see Photo).

  • How does a Navtec mechanical locking cylinder work?

    The current Navtec mechanical locking cylinder uses an extended piston rod with a long thread (equal to the cylinder stroke length). The extended rod is housed in an extended tube at the rod end of the cylinder. When the cylinder is adjusted hydraulically, the nut can be adjusted, following the movement of the piston rod.

  • Is it safe to service a Navtec series 7 integral?

    It is HIGHLY RECOMMENDED that this part is serviced by an an Authorized Navtec service agent who has been trained in the repair of these parts. Ignoring this warning could result in serious bodily injury or death. Navtec Series 7 integrals can be identified two different ways.

Have feedback?

If you have any questions, please do not hesitate to ask us.