SAILOR 6390 Navtex Receiver User manual 98-137261.book Page i Wednesday, October 16, 2013 12:20 PM SAILOR 6390 Navtex Receiver User manual Document number: 98-137261-A Release date: October 16, 2013 i 98-137261.book Page ii Wednesday, October 16, 2013 12:20 PM Disclaimer Any responsibility or liability for loss or damage in connection with the use of …
Feb 21, 2019 . IMO Navtex Manual (2012) in English. Addeddate 2019-02-21 09:46:03 Coverleaf 0 Identifier NavtexManual2012 Identifier-ark
Show more
The Navtex antenna should be mounted where it is elevated clear of metal objects in a location where it cannot easily be damaged. It is essential to read the installation section of the user guide thoroughly before attempting installation of the NAV-7.
Show more
Sirius-3 GMDSS tri-channel Navtex Receiver User Manual Preliminary Version Ver. 1_5 Side 2 Blank Side 3 Congratulations with your new Sirius-3 GMDSS Navtex with touch screen operations. Disclaimer Sirius is a brand name owned by Polaris Electronics A/S, Denmark. We reserve the right to change specifications and instructions given in this manual ...
Show more
Format Document Name NAV4 Plus Datasheet NAV4 Plus User Guide Issue 2 (MAN3019.00) NAV-490 Datasheet NAV-490 490kHz Navtex Converter User Guide (MAN3025.00) NAV4 Paper Jam Clearance Procedure (MAN3032.00) Return to Product Support
Show more
Yacht Repeater. GPS Repeater. Clipper Log. Clipper Easy Navtex. Clipper Wind MK1 (5 wire) Stingray Depth Sounder. Meteoman Barometer. Clipper …
Show more
Furuno Navtex Receiver NX-500 Manuals & User Guides. User Manuals, Guides and Specifications for your Furuno Navtex Receiver NX-500 Receiver. Database contains 1 Furuno Navtex Receiver NX-500 Manuals (available for free online viewing or downloading in PDF): Operator's manual .
This user guide describes the operation of the ICS NAV6plus, ICS NAV6Aplus, ICS NAV6dual and ICS NAV6repeater equipments. Not all the menu features described are provided by the ICS NAV6dual. Where this is the case, the symbol § is used to mark the feature. The ICS NAV6repeater will display Navtex menu pages only when incorporated with a
Show more
Aug 30, 2019 . SAILOR 6390 - User Manual. Date: 30/08/2019 Version: E Document ID: 98-137261 File name: SAILOR 6390 Navtex Receiver - User Manual v. E Size: 2.1 mb Type: Manuals; Products: SAILOR 6390 Navtex Receiver SAILOR 6391 Navtex System. VERSION HISTORY. Version Date Size (Current) E: 30/08/2019 ...
Show more
It automatically receives Maritime Safety Information such as Radio Navigational Warnings, Storm/Gale Warnings, Meteorological Forecasts, Piracy Warnings, Distress Alerts, etc. (full details of the system can be found in IMO Publication IMO-951E - The Navtex Manual). The information received is printed on the receiver's own paper recorder roll.
Switch on your receiver, wait until a Navtex signal is being received, select USB and tune to +/- 516.5 KHz. The position of the spectrum peaks is not important, just avoid to go below 400..500 Hz or so. Optimal settings for Perseus users Set mode to RTTY, BW to 0.8 Khz, and adjust IF bandwidth to 400Hz in the secondary spectrum window.
About the manual Intended readers This manual is a user manual for the SAILOR 6390 Navtex Receiver system. This manual is intended for anyone who is using or intends to use this system. No specific skills are required to operate the SAILOR 6390 Navtex Receiver.
2) Select the “PRINT MENU”, and press the ENT key. 3) Select the “[LIST]” or “[STATUS]”, and press the ENT key. [LIST]: The list of stored messages is printed. [STATUS]: The setting status is printed. The contents of "6.3.5.3 Setting status of the Navtex receiver" are printed. 4) Printing starts.
It automatically receives Maritime Safety Information such as Radio Navigational Warnings, Storm/Gale Warnings, Meteorological Forecasts, Piracy Warnings, Distress Alerts, etc. (full details of the system can be found in IMO Publication IMO-951E - The Navtex Manual). The information received is printed on the receiver's own paper recorder roll.
To display Navtex SET menu screen, select 4.Navtex from MAIN MENU (6.3). Character size, printer setting, etc. can be set up on this screen. 1. Press the ▲ ▼ key to select the menu item. 2. When ENT key or key is pressed, the menu screen of selected item is displayed. - To return to the MAIN MENU menu screen, press the CLR key or key.
2) Select the “PRINT MENU”, and press the ENT key. 3) Select the “[LIST]” or “[STATUS]”, and press the ENT key. [LIST]: The list of stored messages is printed. [STATUS]: The setting status is printed. The contents of "6.3.5.3 Setting status of the Navtex receiver" are printed. 4) Printing starts.
- To return to the MAINTENANCE screen, press the CLR key or key. - "NO DATA" is displayed when Navtex alarm has not occurred. To print the Navtex alarms to the external printer, press the * key in order to display the sub screen. Select the “[PRINT OUT]”, and press the ENT key. Printing is started.