Oerlikon Leybold Vacuum Specs

Listing Results Oerlikon Leybold Vacuum Specs

Frequently Asked Questions

• What is the frequency range of the Oerlikon Leybold Vacuum Cleaner?

  Oerlikon Leybold Vacuum Full Line Catalog35 C01 Technical Data TRIVAC D 16 B-DOT 50 Hz 60 Hz

• What kind of vacuum pump is C01 10 Oerlikon?

  C01 10Oerlikon Leybold Vacuum Full Line Catalog TRIVAC NT, Two-Stage Rotary Vane Vacuum Pumps TRIVAC NT 5 to NT 25 The TRIVAC NT is the latest generation of well-proven rotary vane pumps. The performance and handling characteri- stics of the TRIVAC NT-series have been optimized and adapted to the increasing market requirements.

• How to contact Oerlikon Leybold?

  Oerlikon Leybold Vacuum Schweiz AG, Pfäffikon Churerstrasse 120 CH-8808 Pfäffikon Warehouse and shipping address: Riedthofstrasse 214 CH-8105 Regensdorf Sales: Phone: +41-44-308 40 50 Fax: +41-44-302 43 73 sales.vacuum.zh@Oerlikon.com Service: Phone: +41-44-308 40 62 Fax: +41-44-308 40 60 service.vacuum.zh@Oerlikon.com Spain

• What is a Leybold Vacuum se smoke eliminator?

  The Oerlikon Leybold Vacuum SE smoke eliminator can be utilized on all TRIVAC B and NT rotary vane pumps where pump fluid loss at the exhaust port must be eliminated. These filters consist of a replaceable two-stage coalescing element mounted in a steel hous-ing.

• Is the Oerlikon Leybold Vacuum Phoenix l300i leak detector safe to use?

  Emphasizes additional application information and other useful information pro- vided within these Operating Instructions. The Oerlikon Leybold Vacuum PHOENIX L300i leak detector has been designed for safe and efficient operation when used properly and in accordance with these Operating Instructions.

• What is the Phoenix l300i?

  The PHOENIX L300i basically is a helium leak detector for vacuum applications, i.e. the part under test is evacuated while the test is performed. The vacuum is achieved with a pumping system that is part of the PHOENIX L300i. In addition the vacuum can be generated by pumps which are set up in parallel to the PHOENIX L300i.

• Where is the roughing pump on a Phoenix l300i Modul?

  The PHOENIX L300i MODUL needs a fore vacuum pump, dry or wet version, to be connected because this unit has no internal roughing pump. The connection (DN25 KF) is on the side or under the bottom of the PHOENIX L300i MODUL (Fig. 7).

• What leak rate can the phoenixl300 measure?

  In combination with a partial flow pump set, the PHOENIXL300 can also be equipped for such applications offering leak rate measurements starting at 1000 mbar. Faster detection times through an averaging method which adapts itself dynamically to the leak rates