Show more
See More
OLIMEX Open Source Hardware Development Boards. STMP157-OLinuXino-LIME2 Open Source Hardware Linux computer running Mainline Linux is in mass production in four variants: Industrial grade -40+85C (STMP157 …
Show more
See More
Today, anybody who wants to learn to program ARM devices can start with less than $100 budget. OLIMEX manufactures a number of debuggers suitable for such a low-cost developing - either based on an OpenOCD medium or a CooCox …
Show more
See More
May 03, 2018 . Some USB devices like 3G modems, WiFi etc in active mode draw lot of current and cause problems, to monitor the current consumption and how stabile is your USB voltage you can use this USB-POWER-METER. The consumption is measured and displayed with 10mA accuracy. Voltage with 10mV accuracy.
Show more
See More
OLIMEX makes the Pico Bigger and Better. Much like other OLIMEX products, the RP2040-Pico-PC takes a number of convenient add ons for development boards and makes it part of the design. The baseboard adds a MicroSD card slot, HDMI video, and 3.5mm audio jack output, along with various expansion and debugging options. ...
Show more
See More
Dec 11, 2013 . by OLIMEX Ltd in PIC Tags: board, development, pic32, pic32mz2048 Do not worry PIC32-HMZ144 comes with PIC32MZ2048ECG144-I/PH microcontroller and: 2048KB (yeaaaaaaaaaaah 2 MB!) program memory Flash
Show more
See More
Jan 31, 2013 . The OLIMEX EEG device. It has five audio jacks for connecting custom electrodes. The ground electrode is passive, and the other four electrodes are active and comprise two bipolar channels. The system is very basic, and at around €150 (including the electrodes) is obviously not going to compete with high end multi-channel EEG rigs.
Show more
See More
Mar 13, 2017 . Doing it for only 9.95 Euros. https://www.OLIMEX.com/Products/Duino/PIC32/PIC32-PINGUINO-MX220/open-source-hardware I knew about OLIMEX ones, but thought they started at about 25 or more Euros. Good find!
Show more
See More
Jun 21, 2017 . OLIMEX ESP32-EVB Board with Ethernet, CAN Bus, and Relays up for Sale for 26 Euros. 22€ OLIMEX ESP32-EVB ESP32 Development Board Features an Ethernet Port and Relays. Whitecat ESP32 N1 Board Combines ESP32 WiFi + Bluetooth SoC with a LoRa Transceiver, Runs Lua RTOS.
Show more
See More
I asked to OLIMEX about OLIMEXINO-32U4 and they wrote to me that is available. Comparing OLIMEXino with Arduino boards I find that the main difference is the power section, the OLIMEXino is by far better (lower power consuption and 5 - 3.3V switch + battery charge).
Show more
See More
Then, go to the OLIMEX website (a Google search should give it at the first results). Go to the “MSP430” link (in the left), then choose “JTAG”. The site shows all the JTAG models that you can buy. Click on the club's model image (it was the MSP430-JTAG-TINY-V2 when this tutorial was made).
1- Download the OLIMEX drivers. 2- Plug the OLIMEX JTAG to your computer and go to “Device Manager”. 3- Try to update the drivers. 3bis- If it doesn't work, disable the driver signature enforcement. 4- Open Code Compiler Code Studio to test if everything works well. 5- Work on the robot.
This is an English tutorial (for non-francophone users) about how to install the OLIMEX drivers in a computer, to help whoever will work on the robot in the future. If following this tutorial doesn't help you, ask first at most experimented members of the club, to understand what went wrong.
Experts predict that ARM MCU's are going to replace the industry's standard 8051 architecture in almost all applications within the next 5 years. OLIMEX's aim is to provide low-cost development tools and boards for as many ARM vendors as possible.
Experts predict that ARM MCU's are going to replace the industry's standard 8051 architecture in almost all applications within the next 5 years. OLIMEX's aim is to provide low-cost development tools and boards for as many ARM vendors as possible.
Pin 1 on the JTAG cable is almost always indicated by a red stripe on the edge of the cable. Pin 1 of the JTAG connector on the target board is often indicated by a "1" on the silk-screen. If not, look on the back of the board. Pin 1 is often indicated by a square pad. Connect the USB cable from the OLIMEX pod to your PC.
Connecting the OLIMEX ARM-USB-OCD JTAG Pod Turn off power to the target. Verify any jumper and switch settings on your target board. Connect the pod to the JTAG connector on your target. Connect the USB cable from the OLIMEX pod to your PC. Configure and run the OpenOCD server
The OLIMEX board has an 14.7456 MHz crystal, so the CPU frequency is 14.7456 MHz. If your target is a Philips LPC2xxx, set the "Play this file after Reset" as shown, and read the digression on ARM Reset. For ohter targets, you can often leave this field blank, or consult NoICE help. ADigression on ARM Reset