Onicon Spec

Listing Results Onicon Spec

Frequently Asked Questions

• Why choose Onicon?

  Onicon manufactures high quality & extremely accurate flow & energy meters for the commercial & institutional HVAC market. Based in Largo FL, the meters Onicon produces are wet calibrated for each application using a NIST traceable volumetric prover and are supplied with a calibration certificate.

• What size pipe can I use the Onicon F3500 on?

  It is available for use in pipes ranging in size from 1¼" to 72" in diameter. The F-3500 Insertion Electromagnetic Flow Meter features Onicon's unique hot tap design that allows for easy insertion or removal from the pipe without the use of special tools and without disrupting flow.

• What is the warranty on Onicon products?

  Based in Largo FL, the meters Onicon produces are wet calibrated for each application using a NIST traceable volumetric prover and are supplied with a calibration certificate. Onicon products carry a 3-year warranty (first year ‘no-fault’).

• How does the Onicon f-3500 insertion electromagnetic flow meter work?

  The F-3500 Insertion Electromagnetic Flow Meter features Onicon's unique hot tap design that allows for easy insertion or removal from the pipe without the use of special tools and without disrupting flow. The low maintenance design is provided ready-to-use without the need for field programming.

• What are the different output types of Onicon f-1210?

  Example:“F-1210” = Dual turbine, analog and frequency outputs 00Frequency Output (15 V pulse)For connection to Onicon display or BTU meter only. 10Analog Output (non-isolated) Provides 4-20 mA, 0-10 V and 0-5 V outputs. Most commonly used output type. Frequency output also available.

• Where is the Onicon turbine flow meter located?

  11451 Belcher Road South, Largo FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@Onicon.com Turbine Flow Meter Manual 04/16 - 0721-6 / 13518 Page 2 SAFETY INFORMATION This meter was calibrated at the factory before shipment.

• How do I install an Onicon insertion type meter?

  All Onicon insertion type meters can be installed and removed via a 1” or larger full port ball valve without stopping flow. The terms “Standard” and “Hot Tap” refer to the installation method of the isolation valve kit only.

• What is the size of a single or dual turbine insert?

  Single-Turbine Insertion Meters 1¼” through 72” nominal Dual-Turbine Insertion Meters 2½” through 72” nominal Inline Meters ¾” or 1” NPT threaded or copper sweat process connections Supply Voltage 24±4 V AC/DC at 80 mA Liquid Temperature Range