Show more
See More
Paver Specifications Paver Specifications Sizing, test results, and shipping info for FireRock architectural-grade concrete pavers 1" Pavers 1¾" Pavers 2¾" Pavers 1" Pavers 1¾" Pavers …
Show more
See More
Paver Specifications; Paver Specifications. 32-14-13-Unilock Non-Permeable-Concrete Base 32-14-13-Unilock Permeable 32-14-13-Unilock Non-Permeable-Bitumen 32-14-13-Unilock …
Show more
See More
Clay Pavers This specification is suitable for most residential projects such as patios and driveways. Excavate to reduced depth of at least 200mm below finished level (350mm below …
Show more
See More
Tile Pavers Download Document This guide specification for the U.S. is for the installation of concrete tile paving units whose thickness are less than the minimum 2 3/8 in. (60 mm) …
Show more
See More
The result is a premium paver offering a minimum compressive strength of 8,500 pounds per square inch (psi) (58,605 kPa), a density of 150 pounds per cubic foot and a water absorption …
Show more
See More
The specifications below are developed in partnership with Interlock Concrete Paving Institute (ICPI.org). We update these yearly. If you want to ensure that you have the latest version …
Show more
See More
Der basically realisable range of the edge lengths for silicon wafers is 5 x 5 mm 2 ... 100 x 120 mm 2, for quartz, fused silica and glass wafers 2 x 2 mm 2 ... 300 x 300 mm 2. The cost / wafer piece depends on the material as well as on the number of wafer pieces required. Please contact us for an offer!
Wienerberger clay pavers are produced and tested to the relevant and current British Standards. Testing is carried out at accredited independent testing laboratories. BRITISH & EUROPEAN STANDARDS CLAY PAVING TECHNICAL AND SPECIFICATION GUIDE 2017 BRITISH & EUROPEAN STANDARDS 4 MANUFACTURING STANDARDS & TESTING REQUIREMENTS
This guide specification is for concrete pavers on a sand bed with geotextile over a cement treated base (CTB). This guide specification is for paving slabs supported by pedestals for pedestrian roof plaza decks. This guide specification is for permeable interlocking concrete pavement.
Standard Specifications are written to the Contractor. They define Contractor responsibility in each specification, list the Department’s expectations, and explain what the Contractor is expected to provide. All actions are to be performed by the Contractor unless otherwise noted. A Special Provision may revise the Standard for a specific contract.