What is the qrpguys kit based off of?

As mentioned on the QRPGuys site, the kit is based off of a design by Joe Everhart (N2CX)—an antenna setup he used extensively during the 2017 National Parks on the Air program. His full article can be read on the July 2017 issue of QRP Quarterly .

How many crystals do I need for QRP?

Crystal controlled kits come with crystals for 7023 kHz, but can be changed by the builder for any other 40 Meter crystal. Pixie requires one crystal, Frog needs two, and the Super RockMite needs three, all the same freq. Frog QRP Kit.

Is the qrpguys 40-10 efhw antenna any good?

2021-05-01 I've been using my QRPGuys 40-10 EFHW antenna for quite a while now, especially when doing a Parks On The Air (POTA) activation. It is relatively simple to erect and just works well on 20 and 40. Haven't done much with it on 15 or 10 as propagation is not very good right now much of the time and there is seldom any activity.

Qrpguys Quick Guide - Finder Manual

Q: What happened to the qrpguys 40/30/20m DSB digital transceiver II kit?

This kit has been retired and replaced by the new QRPGuys 40/30/20m DSB Digital Transceiver II Kit. Click here for the new Rev. II transceiver details.

Listing Results Qrpguys Quick Guide

About 19 results and 4 answers.

Welcome to QRPGuys - QRPGuys

Welcome to QRPGuys. QRPGuys is an organization of hams that offer budget and unique ham radio kits. Our specialty will be low cost, high enjoyment kits for the builder that can be assembled in an evening or two. The criteria for our kit designs, are items that are unique in some way, combine features not normally seen, low in cost, and provide ...

QRPGuys DSB Digital Transceiver Kit - QRPGuys

QRPGuys 40/30/20m DSB Digital Transceiver Kit – Retired This kit has been retired and replaced by the new QRPGuys 40/30/20m DSB Digital Transceiver II Kit. Click here for the new Rev. II transceiver details. The QRPGuys DSB Digital Transceiver is a low cost, multiband, DSB transceiver kit, currently with three easy plug-in […]
quick guide

New Equipment - QRPGuys Portable Tri-Band Vertical Antenna

quick guide

Another portable antenna from the QRPGuys - W2LJ QRP

Apr 12, 2018 . The QRPGuys Multi-Band End Fed Antennais designed as a portable 40/30/20m two trap wire antenna with a built-in tuner and SWR indicator. It consists of a main board with tuner and SWR indicator, two trap pcb’s and an end wire support. It incorporates the N7VE led SWR indicator and has a board mounted female BNC for connection to your rig.

W2LJ QRP - When you care to send the very least!: QRPGuys

Dec 06, 2016 . TheQRPGuys are offering a new kit, a 40 Meters Direct Conversion Receiver - for $35 (without the optional digital dial, which is extra). It looks like a fun kit and is all through-hole, which is a big plus for the neophyte kit builder. QRPGuysoffers a whole bunch of inexpensive kits. Be sure to check them out - with Christmas coming and all - maybe you'll find a neat …

QRPGuys.com Kits are Fantastic QRZ Forums

Dec 12, 2018 . KN3O Ham Member QRZ Page. Last night I came home from work to find my kits from QRP Guys has arrived. I ordered the 12W Dummy Load and the End Fed Half Wave Tuner. Both arrived in a small padded mailer, with each kit in it's own ziplock baggie. Time from order to they shipped was a little long, about a week, but I ordered on a Thursday and they ...
quick guide

Fofio!: Radio Kit Guide

for QRP operation, but a few are full-featured professional transceivers (Elecraft, DZ). On the beginners side there are a few sources that stand out: QRPguy.com has a great assortment of kits. QRPme offers the inexpensive, easy-to-build tuna-can products, and I would like to make special mention

Kits Q R P e r - Q R P e r QRP radios, product

P2 Set the hangtime of the relay after you’ve been on air–fast fingers will need a quick release. Set this to your liking. P3 Connect a power meter between a dummy load and the transceiver, set power on 40 to some 8 Watts. Measure on 30 and 20 meters, you should find some 6-7W there.

Qrp Antenna Tuner Kit Instructions

The QRPGuys Multi-Tuner is a Z-match design that will match a wide range of coax fed, long wire, and balanced line antennas, like high-impedance, low-loss UHF twinlead or ladder line for 40m-10m. The Multi-Z tuner is based on a design by Charlie Lofgren, W6JJZ.

End Fed Half Wave Antenna - Martin's Site - Home

So this morning, after a quick check of the feed-line coax using a dummy load, I disconnected the QRPGuys transformer and brought it inside. I had to leave just then but noticed everything was pretty wet. When I got back late this morning it had dried out so I did quick check with a 2700 ohm resistor. SWR was flat 1:1 across both bands.
quick guide

Fofio!: Digital Modes Including FT8 - Ham Radio University

Hi all, thanks for attending my talk at this year's HRU. Here are the important links and the presentation I gave. PRESENTATION: CLICK HE...

Atmel SAM D09 Manuals and User Guides, Microcontrollers

Besides, it’s possible to examine each page of the guide singly by using the scroll bar. This way you’ll save time on finding the necessary info. ... QRPGuys KX Single Lever Mini Paddle Manual Manual (6 pages) Epson S5U1C17564T1 ... Huawei RTN 380H Quick Installation Manual Quick installation manual (29 pages) adafruit learning system ...

[email protected] First antenna for qcx+ 40m

Without a tuner and deployed in an inverted "L" configuration, this is a pretty minimalist, quick deployment antenna. I saw a review recently of a Chameleon antenna that was almost identical to this one (with a winder, exposed torroid, etc.,) and it was about 3x the price.

QRP Antenna kit - the ultimate sbc superstore with all of

QRPGuys is an organization of hams that offer budget and unique ham radio kits. Our specialty will be low cost, high enjoyment kits for the builder that can be assembled in an evening or two. The criteria for our kit designs, are items that are unique in some way, combine features not normally seen, [ Four State QRP Group is honored to have been selected to kit the new …

Multi Z Tuner 40m-10m - QRPGuys - Pinterest

The QRPGuys Multi-Tuner is a Z-match design that will match a wide range of coax fed, long wire, and balanced … Apr 18, 2020 - ” order_by=”sortorder” order_direction=”ASC” returns=”included” maximum_entity_count=”500″] QRPGuys 40m-10m Multi-Z Tuner – $40 Your PayPal receipt is your confirmation that we have received your order.

Atmel ATtiny85 Manuals and User Guides, Microcontrollers

Freescale Semiconductor SABRE MCIMX6Q-SDP Quick Start Manual Quick start manual (13 pages) QRPGuys KX Single Lever Mini Paddle Manual Manual (6 pages) NXP Semiconductors LPC1769 User Manual Operation & user’s manual (841 pages)

Chassis Tilt Bail - Hammond Mfg.

1427BAILKIT are available pre-cut for RM series enclosures or as a do-it-yourself solution in which the aluminium extrusion can be cut to length for any enclosure up to 1M in width. The side sections are made of polycarbonate and offer 12 detent positions to achieve the desired angle. The aluminum extrusion has a black anodized finish for a high-quality look.
quick guide

QRP HF Ham Radio Transceiver/Kits SSB/CW

K1 Quick Reference Card (pdf) - elecraft.com Cheap 'N Dirty Signal Tracing in the K1 (pdf) - elecraft.com. The K1 area pages. On the one page Elecraft - Reflections From Their Reflector that was mentioned above, there are a lot of great topics and of course about K1 too. The two K1 sections below are on this same page. K1 Area - 5 Watt QRP ...

Frequently Asked Questions

What is the qrpguys kit based off of?

As mentioned on the QRPGuys site, the kit is based off of a design by Joe Everhart (N2CX)—an antenna setup he used extensively during the 2017 National Parks on the Air program. His full article can be read on the July 2017 issue of QRP Quarterly .
What happened to the qrpguys 40/30/20m DSB digital transceiver II kit?

This kit has been retired and replaced by the new QRPGuys 40/30/20m DSB Digital Transceiver II Kit. Click here for the new Rev. II transceiver details.
How many crystals do I need for QRP?

Crystal controlled kits come with crystals for 7023 kHz, but can be changed by the builder for any other 40 Meter crystal. Pixie requires one crystal, Frog needs two, and the Super RockMite needs three, all the same freq. Frog QRP Kit.
Is the qrpguys 40-10 efhw antenna any good?

2021-05-01 I've been using my QRPGuys 40-10 EFHW antenna for quite a while now, especially when doing a Parks On The Air (POTA) activation. It is relatively simple to erect and just works well on 20 and 40. Haven't done much with it on 15 or 10 as propagation is not very good right now much of the time and there is seldom any activity.