What is the qrpguys kit based off of?

As mentioned on the QRPGuys site, the kit is based off of a design by Joe Everhart (N2CX)—an antenna setup he used extensively during the 2017 National Parks on the Air program. His full article can be read on the July 2017 issue of QRP Quarterly .

What is QRP labs QCX+?

QCX+: a feature-packed, high performance, single-band 5W CW transceiver kit, with WSPR beacon and built-in alignment/test equipment. Available for 80, 60, 40, 30, 20 or 17m bands. It has rotary encoder synthesised tuning, VFO A/B/Split, Iambic keyer, CW decoder, and more... Click! QRP Labs shop!

Qrpguys Use Manual - Finder Manual

Q: What is the qrpguys multi-tuner?

The QRPGuys Multi-Tuner is a Z-match design that will match a wide range of coax fed, long wire, and balanced line antennas, like high-impedance, low-loss UHF twinlead or ladder line for 40m-10m. The Multi-Z tuner is based on a design by Charlie Lofgren, W6JJZ.

Q: How does the qrpguys k8tnd regenerative receiver work?

The QRPGuys K8TND Regenerative Receiver covers the 60, 49, 41, 31, 25 meter shortwave bands (approximately 4.5 to 12.7 MHz), with a receiver you build complete from the supplied chassis pieces, electrical components, and hardware. You connect the receiver to a simple wire antenna, that can be a simple wire in the attic, or one thrown up in a tree.

Listing Results Qrpguys Use Manual

About 19 results and 4 answers.

QRPGuys User Manuals - ProDocs24.com

QRPGuys PDF Manuals. Download Free User and Service Manuals for QRPGuys Devices at Prodocs24.com.

Welcome to QRPGuys - QRPGuys

Welcome to QRPGuys. QRPGuys is an organization of hams that offer budget and unique ham radio kits. Our specialty will be low cost, high enjoyment kits for the builder that can be assembled in an evening or two. The criteria for our kit designs, are items that are unique in some way, combine features not normally seen, low in cost, and provide ...

QRPGuys Mini Paddle PDF Printed Circuit Board

QRPGuys Single Lever Mini Paddle. First, familiarize yourself with the parts and check for all the components. If a part is missing, please contact us and we will send one. You must use QRPGuys[email protected] to request a part. Parts List. 1 – QRPGuys Mini Paddle PCB pieces, 5 …

Services - QRPGuys

Every attempt is made during the the design and testing of our products to ensure it meets the specifications stated on the product description page and manual. If you are missing a part, please use QRPGuys[email protected], and we will send it at no expense to you. If you are experiencing a problem with […]

Paddles - QRPGuys

Paddles. Pick from here or from the drop down menu at the top of the page to visit the individual product pages for specifications, prices, and a link to the assembly manual for your review. KX Iambic Mini Paddle. KX Single Lever Mini Paddle. Single Lever Mini Paddle. Single Lever Paddle w/Base. Iambic Mini Paddle.

Multi Z Tuner 40m-10m - QRPGuys

The QRPGuys Multi-Tuner is a Z-match design that will match a wide range of coax fed, long wire, and balanced line antennas, like high-impedance, low-loss UHF twinlead or ladder line for 40m-10m. The Multi-Z tuner is based on a design by Charlie Lofgren, W6JJZ. Charlie has designed tuners for years, and some of his best efforts have been in use by the Zuni Loop …

New Equipment! QRPGuys EZ-WSPR Pi - KE6MT

Jun 19, 2019 . QRPGuys EZ-WSPR Pi - KE6MT. New Equipment! QRPGuys EZ-WSPR Pi. Back in January of this year (2019), QRPGuys announced a new kit: the EZ-WSPR Pi, based on a public-domain circuit by HA7DCD. TAPR also has a fully-assembled surface-mount version. These are filter boards enabling you to use a Raspberry Pi to output a WSPR signal.
manual

New Equipment - QRPGuys Portable Tri-Band Vertical Antenna

QRP Labs Kits

This Low Pass Filter (LPF) kit is based on the G-QRP technical pages design by Ed Whetherhold W3NQN. Kits are available for 16 bands 2200, 600, 160, 80, 60, 40, 30, 20, 17, 15, 12, 10, 6, 4, 2m and 222MHz. The kit uses a high-quality double-sided PCB with silk-screen, solder-mask and through-hole plating.
manual

N2CX 40-30-20m Portable Tri-Band Vertical Antenna KIT

Feb 07, 2018 . Assembly manual . Parts List. 1 – QRPGuys TBV pcb 1 – L1,2 T68-2 toroid core (red) 1 – 72” of 26awg magnet wire. 1 – BNC female horizontal connector. 2 – S1,2, SPDT slide switch. 2 – 8-32 x 3/4”L SS Phillips pan head screw 4 – 8-32 SS nut. 2 – #8 internal tooth SS lock washer 2 – 8-32 SS wing nut 4 – nylon tie wrap

QRPGuys K8TND Regenerative Receiver – $40

The QRPGuys K8TND Regenerative Receiver covers the 60, 49, 41, 31, 25 meter shortwave bands (approximately 4.5 to 12.7 MHz), with a receiver you build complete from the supplied chassis pieces, electrical components, and hardware. You connect the receiver to a simple wire antenna, that can be a simple wire in the attic, or one thrown up in a tree.

QRP Labs Kits

A 5W HF PA kit compatible with the Ultimate3S transmitter kit, and also for standalone use in homebrew projects. It has the unique feature of onboard raised cosine envelope shaping for perfect click-free CW. There is a discrete component power modulator with foldback current limiting, adjusted by an 8-bit DAC controlled by the microcontroller ...

eHam.net

Description: The QRPGuys Lidia 40m Direct Conversion Receiver is the. creation of SP5DDJ and he has dedicated it to the memory of. his wife Lidia. Wim has granted permission for us to produce. it as a kit. We are offering it on 40m, but the main IC is. rated to 60mHz so it may be configured to work on other HF.

eHam.net

The construction manual is silent on this potential issue, and is a topic that I think needs to be added to the alignment instructions. The tuning range covers the entire 40 Meter band, with more than 2/3's of the bandspread in the CW portion of the band, as it should be.

eHam.net

MSRP: 20. Description: The QRPGuys LED Tuning Indicator is a standalone SWR 50 Ohm. HF bridge that can be used with your existing tuner if it. does not have built in SWR indication. It can also be used. without a tuner if you are adjusting your antenna for …

QCX-mini 5W CW transceiver kit - QRP Labs

The "QCX-mini" (QRP Labs Xcvr - mini): a feature-packed, high performance, single band 5W CW transceiver kit with WSPR beacon and built-in alignment and test equipment.It is designed specifically for portable operations where small size, weight and current consumption are all important (see Special portable-friendly features section, below).

New Antenna - QRPGuys DS1 : amateurradio

New Antenna - QRPGuys DS1. Just finished putting together the QRP Guys DS1 antenna. This is pictured with the 40m extension. I haven't had a chance to try it on the air, but measured it with the NanoVNA on 40M. Is about 1.1:1 at 7.058MHz, goes up to 2:1 at 7:118MHz.

Frequently Asked Questions

What is the qrpguys kit based off of?

As mentioned on the QRPGuys site, the kit is based off of a design by Joe Everhart (N2CX)—an antenna setup he used extensively during the 2017 National Parks on the Air program. His full article can be read on the July 2017 issue of QRP Quarterly .
What is the qrpguys multi-tuner?

The QRPGuys Multi-Tuner is a Z-match design that will match a wide range of coax fed, long wire, and balanced line antennas, like high-impedance, low-loss UHF twinlead or ladder line for 40m-10m. The Multi-Z tuner is based on a design by Charlie Lofgren, W6JJZ.
How does the qrpguys k8tnd regenerative receiver work?

The QRPGuys K8TND Regenerative Receiver covers the 60, 49, 41, 31, 25 meter shortwave bands (approximately 4.5 to 12.7 MHz), with a receiver you build complete from the supplied chassis pieces, electrical components, and hardware. You connect the receiver to a simple wire antenna, that can be a simple wire in the attic, or one thrown up in a tree.
What is QRP labs QCX+?

QCX+: a feature-packed, high performance, single-band 5W CW transceiver kit, with WSPR beacon and built-in alignment/test equipment. Available for 80, 60, 40, 30, 20 or 17m bands. It has rotary encoder synthesised tuning, VFO A/B/Split, Iambic keyer, CW decoder, and more... Click! QRP Labs shop!