RadioLink Electronic Limited was founded in 2003 and has registered trademark in China, European Union and USA.With nearly 18-year expertise accumulated, RadioLink has become a professional designer and manufacturer of RC products including 3D fixed wing/transmitters/battery charger/flight controller system/GPS/ultrasonic sensor/OSD …
info sheet
Show more
See More
up to 12 RadioLink devices. The EIB600MRF module is a short range device using a transceiver to transmit, receive and repeat the RadioLink RF protocol. This ensures a robust “mesh” of RF signals and reliable paths of communication. The house coding feature confines the RF communication to designated RadioLink devices only, thereby avoiding the
Show more
See More
A: ① Connect the first GPS to GPS/12C port of Mini Pix, and the second GPS to TELEM1 port. (If you use GPS with non-GH1.25 terminal blocks, you need to replace the GPS terminal block) ② Enter Software Config -- Full Parameter List, then search for “SERIAL1_PROTOCOL”, and change the value to “5”. ③ Search for “GPS_TYPE2” in ...
info sheet
Show more
See More
RadioLink plus is designed to be rigged with Crosby standard shackles - DNV-GL type approved wireless tension load cell capable of weighing and dynamic load monitoring in capacities from 1t to 500t – from stock with an ATEX and IECEx version available for …
info sheet
Show more
See More
As the searched CH7_OPT shown in RadioLink Mission Planner, change the value to 40 (Object Avoidance) then click Write Params on the right to save. 2) Transmitter setting steps. Choose a 2-way switch to control CH7 and click INITIAL SETUP- FailSafe, then the PWM value of CH7 is shown. When toggle the switch, if the PWM value of CH7 is more than ...
info sheet
Show more
See More
Mar 09, 2011 . Problem can be solved by holding the aircraft and following the steps in RadioLink Mission Planner to do another geomagnetic calibration. 3) When the aircraft is powered on, listen to the music tone when flight controller is doing self-check. When the self-check is done with success, press the safety button to arm the aircraft.
info sheet
Show more
See More
Mar 30, 2015 . Welcome to Microwave-Link.com. Find out information on technology, deployment and applications for modern Digital Microwave Links. CableFree MW Link installed on a telecom tower. Microwave links are widely used for connectivity in modern digital IP networks. With capacities up to 6Gbps and beyond, a modern Microwave Link network can deliver ...
info sheet
Show more
See More
Step 2 – Checking On Mains Power. Turn the mains power to the alarm back on. Check that the green power light is on. Press and hold the test button for up to 10 seconds to ensure the alarm sounds and triggers any interconnected alarms. Troubleshooting: If the green light does not come on check the circuit breakers, fuses, wiring etc.
info sheet
Show more
See More
Our wireless technology allows antennae free data transmission to 700 meters or 2300 feet and can be connected to the latest Internet of Things (IOT) technology.. Featuring industry leading wireless technology and range, the versatile RadioLink plus is supplied with an update rate of 3Hz and can be easily configured to run at industry leading speeds of up to 200Hz.
info sheet
Show more
See More
The RadioLink Plus is supplied as a complete kit including the dynamometer, wireless display, 4x AA batteries, RFID tag, calibration certificate, and instruction manual. Models up to 35T/77,000lbs are supplied in foam fitted carrying cases. Larger capacities are supplied in an approved shipping crate. Shackles are not included. Inquire if required.
info sheet
Show more
See More
RadioLink Had a few RadioLink surface radio for few years now, 2 RC3S ,2 RC4GS now 1 RC6GS v2 with a R7FG and was a fan, I know this radio had a great potential from few year back, I had waited for the USB update port for a while, finally it come build inside, I also had a few other branch radio, 1 Airtronics MT4 way over price and telemetry only good for …
info sheet
Show more
See More
Click to open the detailed data sheet. RadioLink Plus ATEX. Quotation or information. Purchase.
Show more
See More
The RadioLink Plus is supplied as a complete kit including the dynamometer, wireless display, 4x AA batteries, RFID tag, calibration certificate, and instruction manual. Models up to 35T/77,000lbs are supplied in foam fitted carrying cases. Larger capacities are supplied in an approved shipping crate.
The RadioLink Plus wireless dynamometer is designed for weighing and dynamic load monitoring in a wide range of applications. All Straightpoint RadioLink Plus Dynamometers are supplied with the battery-powered SW-HHP Handheld Display. It is constructed of high-quality aircraft grade aluminum and features an advanced internal design structure.
The RadioLink plus tension load cell can also be used in combination with SP INSIGHT software high-speed wireless data logging software allowing for simultaneous control, display and real-time data logging of up to 126 Straightpoint wireless load cells.
RadioLink plus is designed to be rigged with Crosby standard shackles - DNV-GL type approved wireless tension load cell capable of weighing and dynamic load monitoring in capacities from 1t to 500t – from stock with an ATEX and IECEx version available for hazardous areas, zones 0,1&2.