Cover mouth and nose with mask and make sure there are no gaps between your face and the mask. Avoid touching the mask while using it; if you do, clean your hands with alcohol-based hand rub or soap and water. Replace the mask with a new one as soon as it is damp and do not re-use single-use masks.
Show more
See More
Norada provides indoor/outdoor location reporting and alerting for people and equipment, wireless help calls, lone worker support, service logging, and more. They provide data visualization and analytics on the history of data collected, like heat maps and data-driven insights, to guide the best course of action.
Show more
See More
#2. Via the Ethernet Port on the Raspberry Pi 4. You can also connect your PC with the Gateway through an Ethernet cable. By default, the IP address of the Gateway’s Ethernet interface is 192.168.10.10, so you need to set the IP address of your PC’s Ethernet to the same network segment, for example, 192.168.10.20.. To do this in Windows, go to Control Panel -> …
Show more
See More
RAKwireless recommends a lightning arrestor to be installed on all the antenna N-Type terminals (LoRa, LTE, Wi-Fi and GPS). It is recommended to use a 10-AWG or better grounding wire to connect the arrestor to the tower mounted LoRa antenna. The arrestors have to be Female to Male type in order to fit the antenna and housing connectors.
Show more
See More
Enter root mode by typing the following command: sudo -i. If you are not in root mode, enter ssh [email protected] in the terminal to login to your Gateway, the default password is " raspberry ". 3. Linux OS. If the OS of your PC is Linux, you should do the same as the Mac OS, except the root mode.
Show more
See More
RAKwireless is a leading IoT solutions provider that constantly commits to the production of high-quality LoRa® gateways, sensors, kits and accessories for everyone to use.
Show more
See More
To set up the RAK4200 module to join the TTN using ABP, start by connecting the RAK4200 module to the Windows PC. Then open the RAK Serial Port Tool and wait for the communication to start. It is recommended to test the serial communication by sending an AT command as at+get_config=lora:status or at+version.
Show more
See More
#Assembly Guide. To create a functioning RAK2287 WisLink LPWAN Concentrator, you need to put several components together: # Mount the Concentrator Insert your RAK2287 mPCIe card into the mPCIe slot on the RAK2003 Pi HAT.Make sure the card fits snugly into the connector, it should end up sticking out in a 45-degree angle.Gently press it down and …
Show more
See More
A Guide to Design, Selection, Positioning and More. Introduction Antennas are an integral part of any Radio Frequency (RF) communication system. By definition an antenna is a transducer, a device used to transform RF signals traveling on a conductor (wire, waveguide for example) into an electromagnetic wave in free space and vice versa (this is ...
Email: inquiry@RAKwireless.com
Show more
See More
Cover mouth and nose with mask and make sure there are no gaps between your face and the mask. Avoid touching the mask while using it; if you do, clean your hands with alcohol-based hand rub or soap and water. Replace the mask with a new one as soon as it is damp and do not re-use single-use masks.
Show more
See More
The RAK7268 WisGate Edge Lite 2 is a full 8-channel indoor gateway, based on the LoRaWAN protocol, with built-in Ethernet connectivity for a straightforward setup. Additionally, there is an onboard Wi-Fi setup (supporting 2.4 GHz Wi-Fi) that allows it to be easily configured via the default Wi-Fi AP mode. Moreover, the gateway supports LTE ...
Show more
See More
Enjoy Seamless Connectivity Indoors with RAK7243 from RAKwireless - RAKwireless - IoT Made Easy. RAK7243C WisGate Developer D3+. The RAK7243C is a full-fledged 8 channel LoRaWAN® Gateway . It consists of RAK2245, RAK2013, and Raspberry Pi 3B+. It provides a variety of connectivity options; its size and weight make it ideal for indoor deployment.
Show more
See More
RAK Discover Kit 2 is an upgraded version of the previous Discover Kit. This kit is composed of RAK2287 SPI Module which is powered by the SX1302, RAK2287 Pi HAT, and Raspberry Pi4. Perfect for your DIY IoT projects, IoT terminal controller, or for fast roll-out and rapid prototyping. Note: Helium is not accepting these gateways into the ...
Show more
See More
RAKwireless has its main focus in creating LPWAN products with diverse application in order to solve creative challenges in any give situation. Our line of devices covers, but is not limited to the following types:, Industrial Grade LPWAN Gateways , Consumer LPWAN Gateways, LPWAN Tracker Nodes and LPWAN Environmental Monitoring Nodes.
Show more
See More
RAKwireless offers an amazing collection of IoT products, including LoRa/LoRaWAN enabled gateways, modules, sensors and IoT Boards. Check out the RAK Store today!
Show more
See More
RAKwireless products like RAK7249 Macro Outdoor Gateways are best known for their high-standard versatility and reliability. Achieve success in IoT by using one now!
Show more
See More
RAKwireless is an online retailer of low-power wide-area network (LPWAN) items that assist us in solving innovative problems in any situation using wireless devices. Not only do we sell LPWAN products, but we also sell a variety …
Show more
See More
RAKwireless Launches New Company to Bring Crypto Mining to More Individuals and Accelerate Growth of Helium’s Peer-to-Peer LoRaWAN Network RAK, a pioneer in wireless end-to-end solutions and IoT technology, announces today the launch of its new company, MNTD. a crypto-hardware company providing easy-to-use mining products to consumers.
Show more
See More
RAKwireless is an industrial-leading connectivity provider that builds infrastructures and Modular Edge devices for IoT, Smart City, and Smart Agriculture markets with …
Show more
See More
RAKwireless continues to bring easy to implement solutions to IoT developers and connect the world like never imagined before. I am ready to start a new project with RAKwireless. Do you want to learn more? Contact us Do you want to be a Value Added Reseller?
By default, the firmware is configured to operate the Raspberry Pi in Wi-Fi AP mode, which means that you should be able to find an SSID named “ RAKwireless_XXXX ” on the Wi-Fi network list, for example: Connect to this Wi-Fi SSID by using "RAKwireless" as the default password.
To create a functioning RAK2287 WisLink LPWAN Concentrator, you need to put several components together: Insert your RAK2287 mPCIe card into the mPCIe slot on the RAK2003 Pi HAT. Make sure the card fits snugly into the connector, it should end up sticking out in a 45-degree angle.
Along with the aforementioned set of ready to use products, we also offer a number of boards and modules with open hardware and software, that are aimed at developers. The RAK™ Concentrators that come in both Pi HAT and mPCIe format are perfect for both testing and integration in finished products.
RAKwireless is an industrial-leading connectivity provider that builds infrastructures and Modular Edge devices for IoT, Smart City, and Smart Agriculture ma...
RAKwireless Unified Interface (RUI) is the standard interface defined to simplify the firmware development for the ecosystem of the hardware of RAK. RUI defines an API that abstracts the complexity of the hardware layer.
In a nutshell RAK7258 full gateway with Ethernet (PoE), wifi, optional LTE. Easier to config and manage, let prone to tinkering. RAK2245 full gateway, but you need to add an MCU, does not come with one unless you get the RAK7243C. Has GPS, optional LTE hat, fully open-source, however, geared towards tinkerers and makers.
As with the other RAKwireless Industrial Gateways, it also supports MQTT Bridge mode, with the option for TLS authentication. Power-over-Ethernet (PoE) is supported to serve cases where wall or ceiling mounting is required without the need to install additional power lines.