Raypak Pool Heater Manuals

Listing Results Raypak Pool Heater Manuals

Frequently Asked Questions

• What are the requirements for a Raypak pool heater?

  Raypak pool & spa heaters are built for outdoor installations as standard. The installation must conform to AS5601 OR AS/NZS 5601.1 as a minimum. They must not be installed in any enclosed structure or under eaves, roof overhangs, or pool decks. Outdoor pool & spa heaters must be installed at least 1500mmfrom any window or room ventilation opening.

• Is there a manual for a Raypak rp2100 heater?

  ASME-certified units, typically used in commercial applications, are also available. This manual provides installation, operation, maintenance, and service information for these heaters. If your heater has been installed correctly, operating the heater is an easy task.

• How long is the labor warranty for Raypak?

  Labor Warranty – 2 Years if installed in a single family residential dwelling, 1 Year if installed anywhere other than a single family residential dwelling Parts Warranty – 7 Years if installed in a single family residential dwelling, 1 Year if installed anywhere other than a single family residential dwelling

• What is the manual for a heat pump pool?

  This manual should be maintained in legible condition and kept adjacent to the heat pump pool heater or in a safe place for future use. Model Series 2450, 3450, 4450, 5450, 6450, 6450PD, 6450HC, 8450 & 8450HC INSTALLATION AND OPERATION MANUAL 2 Rev. 4reflects the following: Additions:2450-4450 Model Information.

• Where is the temperature setting on a Raypak pool heater?

  If your heater has been installed correctly, operating the heater is an easy task. The upper front panel of the heater contains the control center that allows you to turn the heater On or Off and adjust the temperature set- tings for the pool or spa. The temperature range is factory set from 65°F (18°C) to 104°F (40°C).

• Is there a manual for a Raypak rp2100 heater?

  ASME-certified units, typically used in commercial applications, are also available. This manual provides installation, operation, maintenance, and service information for these heaters. If your heater has been installed correctly, operating the heater is an easy task.

• Do you need a check valve on a Raypak water heater?

  • Automatic chemical dosing devices and salt chlorinators are usually more efficient in heated water, unless controlled, they can lead to excessive chlorine level which can damage your heater, and which is not covered under warranty. A check valve should be installed between the heater outlet and a chlorinator or other chem - ical dosing device.

• What should I clean before starting my Raypak heater?

  BEFORE START-UP BURNERS Clean main burners, combustion fan (if equipped) and air louvers of dust, lint and debris. Keep heater area clear and free from combustibles, flamma - ble liquids and chemicals. Do not obstruct the flow of combustion and ventilation air.