Razer Chroma Addressable Rgb Controller

Listing Results Razer Chroma Addressable Rgb Controller

Frequently Asked Questions

• How many addressable headers are on Razer Chroma RGB controller?

  There are 6 addressable headers on the Razer Chroma Addressable RGB Controller, and you can daisy-chain your ARGB devices to have more connected. What components are compatible with the controller?

• Can a Razer RGB controller work with a third-party PC?

  Yes, all third-party PC components will work with the Razer Addressable RGB Controller, so long as they are addressable RGB devices and use WS2812b (or equivalent) addressable LEDs. Does the controller have a built in PWM fan controller? No, you will need to use fan headers on your motherboard or a separate controller.

• Where is the accessory tab on Razer Chroma?

  The ACCESSORY tab is the main tab for your Razer Chroma ARGB Controller. From here, you’d be able to configure the properties of connected ARGB strips or devices, customize ARGB LED strip bends (if applicable) and the lighting effect of any or all connected devices.

• What kind of addressable LEDs can I use with an ARGB controller?

  Components using WS2812b (or equivalent) addressable LEDs, such as LED strips, fans, water blocks, radiators, PC cases or other accessories are compatible. How do I control the RGB lighting using the controller?

• Where to Mount Razer Chroma addressable RGB controller?

  The Razer Chroma Addressable RGB Controller can be attached to a free rack via its 2.5" SSD mounting screws, or secured along the interior of your case using 3M double-sided tape that comes included. Supports mounting in SSD brackets.

• What kind of addressable LEDs can I use with an ARGB controller?

  Components using WS2812b (or equivalent) addressable LEDs, such as LED strips, fans, water blocks, radiators, PC cases or other accessories are compatible. How do I control the RGB lighting using the controller?

• How many LEDs can you connect to a Razer controller?

  First, you need to be aware that you can connect up to 80 leds (aka nodes) per port, NOT to exceed more than 240 leds on the controller (as specified on the Razer product page). assuming you got the 3 wire 5v led strips,you can buy a cable like this. and this is assuming that you have not cut the strips.

• What kind of connector do I need for RGB?

  LED strips, fans, CPU coolers, PC cases, and more—as long as your PC components use a standard 3-pin 5V addressable connector, you'll be able to incorporate it into your ultimate RGB build.