Servo Drives

Listing Results Servo Drives

Frequently Asked Questions

• What is the Hardware Manual for the easy servo drives?

  AC Power 150-230VAC Hardware manual of the ES-DH series drives 4 Connecting Motor ES-DH1208 and the ES-MH2 Series Motor A power extension cable is needed to be connected between the ES-MH2 series motor and the ES-DH1208. One end of this power extension cable includes four flying wires.

• How are servomotors used in a servo system?

  A servomotor is a structural unit of a servo system and is used with a servo drive. The servomotor includes the motor that drives the load and a position detection component, such as an encoder.

• Can a servo drive be connected to Ethernet?

  This drive can be part of a solution using EtherNet/IP to integrate high-performance servo and AC drives, I/O, smart actuators and any other EtherNet/IP-connected device. This drive provides safety features to help improve operator safety and enhance machine efficiency.

• How to connect a leadshine easy servo drive?

  Connect Leadshine ES-MH3 series motor to ES-DH2306 Hardware manual of the ES-DH series drives 5 Connecting Encoder As the easy servo drive works in close-loop mode, it needs to know the actual motor position. The encoder mounted in the motor offers such information. Note that the easy servo drive can not work without encoder feedback.

• Which is digital AC servo motor and driver?

  Thank you for purchasing Digital AC Servo Motor & Driver, MINAS A5-series. This instruction manual contains information necessary to correctly and safely use the MINAS A5-series motor and driver.

• Why is my ATO AC servo driver not working?

  The servo driver is unable to work normally and also probably led to produce malfunction due to strong external disturbing signals or the serious effect on the power cord of the servo driver and control signal.

• How to use AC servo motor and Minas a4p?

  Instruction Manual AC Servo Motor and Driver˜ MINAS A4P Series˜ DV0P4490 •Thank you for buying and using Panasonic AC Servo Motor and Driver, MINAS A4P Series. •Read through this Instruction Manual for proper use, especially read "Precautions for Safety" ( P.8 to 11) without fail for safety purpose.

• Do you need ground wire for ATO servo?

  Incorrect connection may lead to damage to the product. ●PE terminal must be connected to a ground wire and make sure that the ground wire is reliably grounded. ●AC 220V power supply is suitable for this product.