Show more
See More
The Centerboard: shall be of anodized aluminum plate, 5/16" thick, with a total weight of 20 pounds, plus or minus one pound. The outline of the centerboard shall conform to the official plans. Any surface finish is allowed, except polymer paint. Edges may be faired or finished at the owner's discretion. Method of hoisting centerboard is optional.
Show more
See More
J. Tanzer. Designer 24'7" / 7,5m Length Over All 21'10" / 6,65m Lenght Water Line 8'0" / 2,44m Beam 4'0" / 1,22m Deep Keel Water Draft 2'8" / 0,82m Shoal Keel Draft 3800 lbs / 1725 kg Deep Keel Displacement 4150 lbs / 1880 kg Shoal Keel Displacement 1600 lbs / 725 kg Deep Keel Weight 1950 lbs / 885 kg Shoal Keel Weight 32'0" / 9,75m Mast Height
Show more
See More
A rare variant, the Tanzer 22 T/4, has a slightly modified rudder and sailplan allowing it to rate at, or below the 1/4 ton level under IOR MkIII. The rule itself was changed very soon afterward so this version was sold for only a very short time. Rig Dimensions for T/4: I: 27.50' / 8.38m. J: 8.60' / 2.62m.
Show more
See More
Tanzer Industries Ltd. Associations ? # Built ? Hull Monohull Keel Swing Rudder ? Construction FG Dimensions Length Overall 10.5 m Waterline Length 8.4 m Beam 3.5 m Draft 0.6 m — 2 m Displacement 5,897 kg Ballast 2,585 kg Rig and Sails Type Sloop Reported Sail Area 51.2 m² Total Sail Area 51.2 m² Mainsail Sail Area 22.8 m² P 11.5 m E 4 m Air Draft
Produced on: 1983
Show more
See More
The Tanzer line ranged from 16 to 35 feet. The most successful model was the Tanzer 22 with more than 2200 built. But other models including the 26 were also built in large numbers. In it’s heyday Tanzer built boats on both coasts of the U.S., but the factory at Dorion, Que., turned out the bulk of the roughly 8,000 Tanzers built.
Dissoluted on: 1986
Show more
See More
Sailboat and sailing yacht searchable database with more than 8,000 sailboats from around the world including sailboat photos and drawings. About the Tanzer 8.5 sailboat
Show more
See More
Notes. The Tanzer 27 was originally known as the PACESHIP PY26. Shoal draft: 3.25'/.99m. Keel/CB: Draft - BU 2.58 ft; BD 6.58ft Disp. - 6700lbs Ballast - 2750 lbs
Show more
See More
The Tanzer 10.5 looks very much like a sleek sailboat. She is not your average motorsailer but a swift, comfortable aft-cabin cruising yacht. Fresh water boat, well taken care of and loved motor sailer with both interior and exterior steering stations. Sleeps 6. Headroom: 6.33'.
Show more
See More
Tanzer preowned sailboats for sale by owner. Tanzer used sailboats for sale by owner.
Show more
See More
The design and specifications of the Tanzer 16 sloop are owned by Tanzer Industries Limited, who also own the registered Tanzer 16 trademark. Tanzer Industries Limited will not make any changes to the design, equipment and specifications of the Tanzer 16 sloop without the approval of the Association.
Show more
See More
The Tanzer 26 (T-26) is a mast head sloop designed in 1974. They were mainly built in Canada at the Vaudreuil plant of Tanzer Industries. After more then 40 years, all of the above is still very true as these overbuilt boat have aged extremely well, some even with little maintenance.
Show more
See More
Tanzer Spec Sheets (16-overnight, 22, 7.5, 25, 26, 27, 8.5, 28, 29, 10.5) Tanzer Plans (16, 22, 7.5, 25, 26, 27, 8.5, 28, 29, 31, 10.5) Click to join Tanzer Visit Tanzer Yahoo Group Useful Sailing Sites: Online Graphical Tide Tables - Solomons
Beam: 9' 7" (2.92 m)
Length Over All: 25' 3" (7.7 m)
Designer: Joubert- Nivelt
Length Water Line: 21' 10" (6.65 m)
Show more
See More
Select a sailboat to see it's specifications Note: lavoile.com ne garantie pas l'exactitude des informations. Note: Information is not guaranteed accurate by lavoile.com ... Tanzer: Tanzer 16 Overnighter: Tanzer 22: Tanzer 25: Tanzer 7.5: Tanzer 26: Tanzer 27: Tanzer 8.5: Tanzer 29: Tanzer 10.5: Autres - Others Henley 20: Shark: Olympic star 23 ...
Show more
See More
Tanzer Industries Limited was a Canadian boat manufacturer based in Dorion, Quebec.The company specialized in the design and manufacture of fibreglass sailboats.. The company was founded by Johann Tanzer in 1966 and went bankrupt in May 1986. Johann Tanzer designed many of …
specification
Show more
See More
Cuthbertson’s design features moderation all its proportions; a waterline of 24 feet, a beam 10 feet, six inches, and a draft (with fin keel) of five feet, three inches. The Tanzer 31 has medium displacement, but its generous mast head sail plan provides plenty of horsepower.
Show more
See More
The Tanzer 22 is a small recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig and a transom-hung rudder. It displaces 2,900 lb (1,315 kg) and carries 1,250 lb (567 kg) of ballast. The boat has a PHRF racing average handicap of 237 with a high of 243 and low of 222.
Show more
See More
The Tanzer 22 is a small recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig, a transom-hung rudder and a fixed fin keel.
Founded by Johann Tanzer, Tanzer Industries Ltd. was one of the largest sailboat manufacturer in Canada for more than 20 years. The Tanzer line ranged from 16 to 35 feet. The most successful model was the Tanzer 22 with more than 2200 built. But other models including the 26 were also built in large numbers.
Cuthbertson’s design features moderation all its proportions; a waterline of 24 feet, a beam 10 feet, six inches, and a draft (with fin keel) of five feet, three inches. The Tanzer 31 has medium displacement, but its generous mast head sail plan provides plenty of horsepower.
Tanzer Industries Limited was a Canadian boat manufacturer based in Dorion, Quebec. The company specialized in the design and manufacture of fibreglass sailboats. The company was founded by Johann Tanzer in 1966 and went bankrupt in May 1986. Johann Tanzer designed many of the boats his company sold.
The Tanzer 26 (T-26) is a mast head sloop designed in 1974. They were mainly built in Canada at the Vaudreuil plant of Tanzer Industries. After more then 40 years, all of the above is still very true as these overbuilt boat have aged extremely well, some even with little maintenance.
Most people reading this thread will already know, but just to be clear, the Tanzer 26 is NOT "a.k.a. the Tanzer 7.5". They are similar but significantly different in size; the 7.5 is ~24.5' LOA. Most people reading this thread will already know, but just to be clear, the Tanzer 26 is NOT "a.k.a. the Tanzer 7.5".
The Next Generation. Similar to previous generations of TASER weapons, the TASER X26P is a single-shot device that does not require replacing inventories of cartridges.