Detailed specifications covering the control console shall be a part of these specifications and are appended hereto. Control cable shall be supplied in sufficient quantities for proper operation of the lighting control system. The power center shall be designed to operate at a voltage of: 120/208 volts, 60 Hertz 240 volts, 50 Hertz
Show more
See More
The Producer 3 outputs both USITT DMX 512 and USITT AMX 192 control signals simultaneously. The control console is capable of driving up to 1000 feet of cable with no modifications. The console offers two AMX 192 outputs controlling 384 dimmers and one DMX 512 output controlling 512 dimmers.
Show more
See More
Contact Teatronics Lighting Controls or your local distributor for more information on a system to meet your exact lighting needs. ARCHITECTURAL & ENGINEERING SPECIFICATIONS The dimmer pack shall include, but not be limited to, the following components: an aluminum enclosure and internal chassis containing 12 complete 1200 watt solid-state dimmers with …
Show more
See More
Active control console (Requires 120 volts AC) 60mm channel slider controls in scene X, scene Y configuration Available in channel configurations up to 60 channels, by grouping of 12 Specifications: Enclosure dimensions: (H x W x D) 12 channels: 5.5 x 21.0 x 15.0 in. (14.0 x 53.3 x 38.0 cm) 24 channels: 5.5 x 31.0 x 15.0 in. (14.0 x 79.0 x 38.0 cm)
Show more
See More
Technical Specifications: Power: 900W/1500W Rated Voltage: 120V Rated Frequency: 60Hz Timer: 12 hours Auto Power Off: 24 hours without operation Temperature Range: 41°F-95°F What’s in the Box: 1 x TaoTronics PTC Space Heater (Model: TT-HE006) 1 x Remote Control...
Show more
See More
1. Control Requirements of Theatre Lighting. Theatre lighting is an open-loop control problem. Its outputs must be updated faster than the human visual response: typically 20 to 30 times per second. A memory console may have from fifty to a few thousands of …
Show more
See More
DMX control consoles send information for up to 512 dimmers at a time down the same cable. The starting channel sets the decoder to read information for a particular block of dimmers. The starting channel is selected through a pushbutton switch on the front panel. Valid starting channels range from 001 to 505 for the DE8 and to 465 for the DE48.
Show more
See More
3 Teatronics Genesis 1224 Dimmers / 12 channels of 2.4 K each for a total of 36 X 2.4K Plus a power distro with Camloc in and out, switches for 3 dimm. Used Genesis 1224 by Teatronics - Item# 30613 Sell
Show more
See More
at Electronic Theatre Controls' option such parts as shall be determined to be defective on Electronic Theatre Controls' inspection. Electronic Theatre Controls will not assume any responsibility for any labor expended or materials used to repair any equipment without Electronic Theatre Controls' prior written authorization.
Show more
See More
That's how the Teatronics LD series lighting controller was able, with cheap 8-bit microcontrollers, to equal the performance of the competitors' 32-bit CPUs and DSP coprocessors. That's how the Teatronics MD288 phase-controlled 96 Triacs with one microprocessor and one timer.
Show more
See More
Elastimold 02500270. Elastimold® Loadbreak Lug, Long, 15 to 35 kV, 200 A, 4/0 AWG, 250 kcmil Conductor, Compression, 1-Hole, 3/8 in Stud, -40 to 65 deg C, Aluminum/Copper, Bare, 0.63 in Dia x 2.88 in H. Compressed stranded/compacted solid bi-metal conductor.
Show more
See More
Hammond Suzuki Products — The Hammond Organ Is One of the Most Recognized Instruments in Contemporary Music Hammond Suzuki Organs come in 61, 73 and full 88-key varieties. The Heritage Pro is the modern take on the classic B-3, and the A-3 comes with a 25-note pedalboard and bench in the iconic Red Walnut finish.
Show more
See More
High-capability solution tying together lighting controls, motorized window shades, digital LED drivers, and sensors under one software umbrella . Works with tunable white, enabling adjustment and fine-tuning of color temperature and intensity
Show more
See More
Rack lights for equipment racks come in a variety of formats. Vertical magnetic-mount light bars or rackmount panels for the front, rear, or top of racks. There are models with gooseneck style lights and models with hooded lights to highlight the front of equipment. The portable utility light hangs or mounts magnetically.
PLR-PSRK are the LED rail kits that are used in conjunction with the PLR-PS3 and the PLR-PS3S control units to light your rack. These rail kits will attach to your rack without having to remove any of the gear currently in the rack. < ... Expected to ship out in 8-10 business days.
Rackmount light occupies one rackspace and provides ambient lighting to front and rear of rackmount components Provides evenly distributed illumination for component viewing Retractable light shelf with dim ... Expected to ship out in 8-10 business days.