Techbikes Ltd User Manual

Listing Results Techbikes Ltd User Manual

Frequently Asked Questions

• Is there a Tech 2 user's guide?

  Tech 2 User’s Guide. The Tech 2 User’s Guide provides a comprehensive overview of the Tech 2 scan tool. Everything contained in this manual is based on the latest product information available at the time of publication. The right is reserved to make changes at any time without notice.

• Why do you need a bike repair manual?

  The bike mechanics, there are many Bike Repair Manual will help you magazines available that contain avoid such problems by demonstrating tips on specific components.

• How often should I Clean my Bike?

  As long as the bike is of good quality, you will only need to keep it clean and check it regularly for signs of wear. Hybrid bikes, utility bikes, and folding bikes are all dependable machines that are suited to commuting to work or school, day-to-day transport needs, or simply a pleasurable ride in the park or even the countryside.

• How do I contact GM-Techline customer support?

  To obtain assistance with a question or problem concerning the operation of your Techline product and its attached products, or to arrange for warranty and non-warranty repairs, telephone the GM-Techline Customer Support Center. To order replacement parts, contact GM Dealer Equipment or your customer support representative for GM-Techline.

• How do I make a tsdz2 programming cable?

  To make a TSDZ2 programming cable, you need a speed sensor extension cable - not just a spare speed sensor, because not all the wires coming from the motor/controller speed sensor 6 pin connector are carried through to the sensor itself. The sensors themselves only utilize a couple wires, the remaining being for lights, and programming purposes.

• How do I program my tsdz2 controller with data memory?

  The software will start in the ‘Program Memory’ tab, but the only place we are concerned with is ‘Data Memory’. Open the DATA MEMORY tab and press the ‘READ’ button to read the current parameters set to your TSDZ2 Controller. You will notice the ’00 00’s populate with values, particularly on line 00004000, as seen below:

• What is the firmware version of the tzidc-200?

  Device firmware version: 05.00.00 Further information Additional documentation on TZIDC, TZIDC-200 is available to download free of charge at www.abb.com/positioners. Alternatively simply scan this code: Manufacturer ABB Automation Products GmbH Process Automation Schillerstr. 72 32425 Minden Germany Tel: +49 571 830-0 Fax: +49 571 830-1806

• How do I change the voltage and amperage values on my tsdz2?

  Change the Voltage and Amperage Values as Desired (as described above), then press the ‘WRITE’ button to write the new parameters to your TSDZ2 Controller. That’s it! It is recommended to close and reopen ST Visual Programmer, and re-read the settings, to ensure your changes did in fact ‘write’.