Vector Welding

Listing Results Vector Welding

Frequently Asked Questions

• What do you need to know about manual welding?

  In manual welding, the operator points the electrode in the direction of welding and uses the arc to melt the metal at the joint. If filler metal is required, for example when making a fillet weld, it is added to the leading edge of the weld pool. Filler is supplied as cut lengths of wire - usually 1 metre long.

• Are there any imported components in a TIG welder?

  The core components IGBT, transformers, etc. are all imported brands, and the main control circuit introduces German imported technology. 100 standard processes are built, and 30 inspection and inspection procedures are carried out to ensure stable welding of products.

• What do you need to know about arc welding?

  arc welding. applies to a large, diversified group of welding processes that use an electric arc as the source of heat. The creation of a weld between met- als using these processes does not usually involve pres- sure but may utilize a filler metal. The arc is struck between the workpiece and the tip of the electrode.

• What do you need to know about manual welding?

  In manual welding, the operator points the electrode in the direction of welding and uses the arc to melt the metal at the joint. If filler metal is required, for example when making a fillet weld, it is added to the leading edge of the weld pool. Filler is supplied as cut lengths of wire - usually 1 metre long.

• Do you need current service packs for vector?

  You will find interesting instructions, articles, answers and hints on the most common support issues. The Vector KnowledgeBase is available in English language. Do you need current service packs, driver updates, demos or manuals?

• What's the safe voltage for an arc welder?

  The output circuit of an arc welder is controlled at a ‘safe voltage’ but this safe voltage can also kill if given ideal conditions. The ancillary circuits of most welders are also at a safe voltage of either 32 V or 24 V, although some machine manufacturers also use 110 V on older control circuits. 5 5

• Where do I send my support request to vector?

  You can submit your support request in the Vector Customer Portal, via e-mail or telephone or use one of the forms below. Please select your issue type below to submit your issue to the Vector support team. Do you have technical questions and need helpful answers?