This section is dedicated to Wheel Balancers manuals & user guides which are included in the main list of categories. The page provides a catalogue of brands and devices, each offering to view or download an updated manual. To see the entire list of Wheel Balancers …
Show more
See More
This is a copy of an operator's manual for a Sun Wheel Balancer which contains useful information to show how the manufacturer intended for the CWB-1762 to be used. Contents of the manual include wheel balancing …
Show more
See More
A full rotation will cost anywhere from $18 to $35. On average, balancing tires will cost about $5 to $15 per tire. Balancing costs can vary according to the size of the wheel. The mounting and balancing of a wheel up to 16 inches (a set of 4) can cost up to $60.
Road force balancing refers to the even distribution of mass in a tire and wheel assembly. While tire balancing measures the imbalances, road force balancing detects the up and down motion of the tire.
Dynamic balance. Dynamic balance requires that a principal axis of the tire's moment of inertia be aligned with the axis about which the tire rotates, usually the axle on which it is mounted. In the tire factory, the tire and wheel are mounted on a balancing machine test wheel, the assembly is rotated at 100 RPM...
Keep this manual and the illustrated materials supplied with the equipment in a folder near the place of operation so as to allow the machine operators to consult the documentation at any time. The manual is only to be considered valid for the machine serial number and model stated on the attached nameplate.
Ⅰ.PREFACE WARNING There will be one year of warranty period on the condition that the machine including the operation system , tools and accessories are used properly and/or without damage.
Environmental operating conditions must comply with the following requirements: - relative humidity ranging from 30% to 80% (without condensation); - temperatures ranging from 0° to +50°C. The floor must be strong enough to support a load equal to the weight of the equipment plus the maximum load allowed.
According to the label on the connect between power cable and body, the power cable connect socket must be grounded with the reliable earth wire. All the electrical devices installation must be done by the qualified staff.