Quick Specs:
Show more
See More
The eXtensible Host Controller Interface (XHCI) specification describes the register-level host controller interface for universal serial bus revision 2.0 (USB2) and above. The specification includes a description of the hardware/software interface between system software and the host controller hardware. This specification is intended for hardware component designers, system builders, and device driver …
Show more
See More
Jocel XHC-22 | Full Specifications: Product type: Fridge, Height: 535, Width: 280, Depth: 370, Digital thermostat: yes, Placement:
Show more
See More
Quick Specs: Capacity: 40000 lbs / 18144 kg Capacity (MT): Load Center (in): 30 in. / 762 mm Wheelbase (in): 110.0 in. / 2794 mm Engine: QSB6.7-C173 T4F Transmission: TC-32 3-sp. Mast (ft/Type): 8-ft. Direct Lift Carriage Att. (in/Type): C-65 Forks (in): …
Show more
See More
Part Numbers : Stoody XHC Stoody XHC 1/4x14 10# 11382400 FIND A DISTRIBUTOR: 1/8 in / 3.2 mm x 14 XHC CTD 10lb Pak 11383000 FIND A DISTRIBUTOR: 3/16 in / 4.8 mm x 14 XHC CTD 10lb Pak 11382500 FIND A DISTRIBUTOR: 5/32 in / 4.0 mm x 14 XHC …
Show more
See More
And the XHC has the ability to punch through 150 sheets in a single punch. And in doing so, we were truly impressed with just how easy it was. Besides incredibly sharp standard sized 3-hole punches, it's a two handed machine allowing you all the power in the world or at least just for paper punching.
Show more
See More
This Ex-cell-o XHC 241 M/3 Horizontal Machining Center was built in the year 2003. It is operated through a Indramat MTC 200 control unit . This machine perform with a spindle speed up to 16000 rpm.
Show more
See More
SPECIFICATIONS. Compatible With: XHC-150;XHC-2100;XHC-2300;XHC-3300; Remove Compare Link: No; Short Description: CARL® 6pk of Replacement disks "only." Used on CARL's XHC-2100, XHC-2300, HC-72, XHC-150 and the XHC-3300. Type: Punch Disk
Show more
See More
Detailed specs and features for the 2021 Volvo XC90 including dimensions, horsepower, engine, capacity, fuel economy, transmission, engine type, cylinders, drivetrain and more.
Show more
See More
Volvo XC90 features and specs at Car and Driver. Learn more about Price, Engine Type, MPG, and complete safety and warranty information.
Show more
See More
Detailed specs and features for the 2022 Volvo XC60 including dimensions, horsepower, engine, capacity, fuel economy, transmission, engine type, cylinders, drivetrain and more.
Show more
See More
Overview. The Carl XHC-2300N hole puncher, also called the HD-530N, is an extra heavy duty solution that can punch as many as 300 sheets of paper at a time. The strong punch handle grip makes it easy to punch through that high capacity of pages, while the extended length allows for extra leverage. It features precision-ground hardened steel punch heads keep the holes clean from top to bottom.
Show more
See More
Mobilgrease XHP™ 222 grease. Mobilgrease XHP™ 220 Series high performance lithium-complex greases offer outstanding performance in marine operating conditions – including high temperature, water contamination and shock loading operations. It is suitable for use in a variety of marine applications including winch, windlass and general ...
Show more
See More
This newly developed digital triax transmission system offers long cable runs of up to 1200 m (3937 feet)* via a ø14.5 mm cable between the camera and the CCU. *The maximum cable length depends on the camera system configuration, lens type, and the number of cable connections.
Show more
See More
You should check out the Carl XHC-2300N aka HD-530N extra heavy duty hole punch. With the ability to 2-hole punch up to 300 sheets at a time, you can be done with your project exponentially faster than if you used a standard hole punch.
Show more
See More
XHC USB 2MHz Mach4 CNC 6 Axis Motion Control Card Breakout Board MK6-M4 for Machine Centre, CNC Engraving Machine #SM782 @SD
Show more
See More
Liquid Cooling,Temperature stabilizer etc. No need to move internal parts when in transit. Solid state, vibration free, noise-free. Should use with a heat sink. Simple to install and operate. Long life time. Slim and compact. Model number: TES1-12704. Voltage: 12V.
Show more
See More
The SCX1HC has become a popular choice for interior dialogue boom pole miking. It has a precision machined brass body, interchangeable capsules, black multi-layer class ‘A’ liquid finish, and a gold-plated XLR connector. The SCX1 studio condenser microphone is manufactured to …
Show more
See More
The eXtensible Host Controller Interface (XHCI) specification describes the register-level host controller interface for universal serial bus revision 2.0 (USB2) and above. The specification includes a description of the hardware/software interface between system software and the host controller hardware.
The goal of XHCI architecture is to define a USB host controller to ultimately replace UHCI/OHCI/EHCI, to provide highly power efficient operation, higher performance, and extensibility to new USB specifications, such as USB3 and beyond.
The HXC-100 is equipped with a newly developed three 2/3-inch type 2.2-megapixel HD CCD. Based on Sony HAD sensor technology and the latest on-chip lens structure, this new CCD offers a high sensitivity of F11 at 2000 lx.
Their blue color enables easy verification of application: Mobilgrease XHP 005 and 220 are softer, high-temperature greases recommended by ExxonMobil for centralized grease application systems, gear lubrication, and where extreme-cold-temperature pumpability is important.