Zeta Alarm Systems Use Guide

Listing Results Zeta Alarm Systems Use Guide

Frequently Asked Questions

• Who are Zeta alarms limited and what do they do?

  Zeta Alarms Limited (Formerly GLT Exports Limited) was founded in 1985 and is a privately held UK manufacturer of early warning fire detection systems. To meet the requirements of our ever-changing market, Zeta Alarm Systems pride ourselves on being a complete system supplier.

• Is the zeta6104 required to be EER compliant?

  The Zeta6104 is sold as a complex component to professional assemblers. As a component, it is not required to be compliant with Electromagnetic Compatibility Directive 89/336/EEC.

• How does a fault warning work on a fire alarm?

  Fault Monitoring All circuits must be checked for line integrity. If a part of the system has a problem which may affect its operation, a fault warning must be given by the fire alarm panel (LED & buzzer indication). The fault relay will also activate.

• Is the zeta6104 compliant with the Low Voltage Directive?

  LVD and EMC Installation Guidelines The Zeta6104 is in compliance with the Low Voltage Directive (72/23/EEC) and the CE Marking Directive (93/68/EEC) of the European Community. When installed according to the procedures in the main body of this installation guide, the Zeta6104 may not necessarily comply with the Low Voltage Directive (LVD).

• Who are Zeta alarm systems and what do they do?

  Zeta Alarm Systems was founded in 1985 and is a privately held UK manufacturer of early warning Fire Alarm Systems, Gas Detection and Emergency Systems. Our brand name Zeta Alarm Systems is well known throughout the industry and is acclaimed in over forty countries worldwide.

• Do you need to open fire alarm control panel?

  FIRE ALARM CONTROL PANEL SAFETY ISSUES There is no need to open this fire alarm during normal operation. Any work carried out on this system must be performed by a competent person who is familiar with this type of system. This equipment will operate safely provided it has been installed correctly in compliance with the Installation Manual.

• How do I Reset my Fire alarm system?

  •Reset the System by pressing (Stop sounders, Silence fault tone, Reset). •Enter access code. Press the LED Test button. Check that all LEDs light, and the buzzer sounds •Check that no call points or fire detectors are obstructed in any way.

• How does a fault warning work on a fire alarm?

  Fault Monitoring All circuits must be checked for line integrity. If a part of the system has a problem which may affect its operation, a fault warning must be given by the fire alarm panel (LED & buzzer indication). The fault relay will also activate.