RailCom is a bi-directional data communications technology developed by Lenz, and found in NMRA Recommended Practices RP 9.3.1 and 9.3.2. RailCom can read data transmitted by a multi-function decoder. Examples include speed, motor load, contents of any CV, and its address.
Show more
See More
RailCom RailCom is a bi-directional data communications technology found in The NMRA Recommended Practices RP 9.3.1 and 9.3.2. RailCom allows devices to read data transmitted by the decoder. Most TCS decoders support RailCom. NOTE: A value of 8 must be added to CV29 to Enable RailCom CV28 – RailCom Configuration - Default Value (0) CV28 FeaturesValue
Show more
See More
Show more
See More
Dec 06, 2011 . The RailCom receiver is able to detect the current using a sensing resistor. The system is arranged such that the voltage that appears across the sensing resistor as a result of the RailCom current is lower than that needed to overcome the forward voltage of each decoder bridge rectifier that remains connected in the locos.
Show more
See More
RailCom enables bi-directional communication between the command station and decoders. This allows for read-back of CVs while programming on the mainline. The inclusion of RailCom opens up significant opportunities for future features and expansion. Physical Throttle Compatibility
Show more
See More
Dec 02, 2017 . DCC DECODED - ESU WiFi Cab Control. Sat, 2017-12-02 07:37 — Tim Latham. TMTV video segments. TrainMasters-TV. I am really impressed with the new ESU WiFi Cab Control setup, but I have a few questions. Matt said the hand controller would ‘look at’ the decoder and read all the settings and function buttons. My question is does that only ...
user guide
Show more
See More
Railmaster English Manual. 1 year ago. Updated. Also check the Software Download section of patches and update instructions. Railmaster_Manual_English_v1-74.pdf. 9 …
RailCom
Show more
See More
The Z21 app also allows you to carry out CV programming to further optimise the driving response and thus the driving pleasures on your system. Clear layout. Automatic export of the CV values that affect the driving response with graphical curve. Programming is possible via POM or programming track. Direct display of the corresponding bits.
Show more
See More
Models with lighting outputs feature a unique option for addressable "Day/Night" dimming. Decoder Formats: MX820D - 7 highly flexible wires 120 mm in length, waterproof casing. MX820E - 5 highly flexible wires 120 mm in length, 2x solder pad input connections. MX820V - 7 highly flexible wires 120 mm in length, 4x solder pad input connections.
Show more
See More
You can communicate with any LCC system to control switches, adjust layout lighting, and anything else that the LCC bus is connected to. RailCom enables bi-directional communication between the command station and decoders. This allows for read-back of CVs while programming on the mainline.
A command station compatible with RailComPlus displays the locomotive, its functions, and saves them for future use. If the DCC address is already in use by another multi-function decoder in your command station's database, the command station will automatically offer to change the new locomotive’s address to another address which is not in use.
It works with RailCom feedback, which is available on the ESU V4 decoder series. It seamlessly integrates with 3rd party software used for layout control, dispatching and tuning and maintenance. I used ECoS successfully with Decoder Pro.
The inclusion of RailCom opens up significant opportunities for future features and expansion. The TCS Command Station is cross-compatible with current hardware from other manufacturers. It currently includes support for up to 62 NCE, Ramtraxx, and/or SystemOne Throttles and Accessories via the on-board RJ-11 connector.
Lenz demonstrated the RailCom concept at a DCC Working Group meeting in the spring of 2000. It has been incorporated into an NMRA RP for Two-Way communications between the command station and multi-function decoders on the track. RailCom is completely backwards compatible with Digital Command Control.
A RailCom or RailCom Plus command station. RailCom implies slightly modifying the DCC signal on the tracks. It will remain perfectly compatible with non RailCom decoders, but adds a short electronic “cutout”. So you will need a CS that is either RailCom (or better RailCom Plus) compatible.
RailCom, as said above, is not an official NEM norm. It starts being adopted however by several German manufacturers: This has been around for about 2 years, and is yet another layer on top of DCC.
RailCom Plus is an enhancement of the Lenz RailCom standard by ESU . RailCom Plus is an improvement over RailCom. It allows a locomotive to be automatically recognized and registered by the command station, previously only possible with Märklin 's MFX standard for their two rail trains.